What is a Phosphate powder transportation? Introduction to the advantages and characteristics of Powder conveying functions

Phosphate powder transportationis an efficient and environment-friendly way to transport materials by using the energy of airflow.，the advantage is It can feed from one place to many places for decentralized transportation and realize long-distance operation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Materials are transported by closed pipelines.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、It can be discharged at a single point or at multiple points.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.。The following is to introduce the Phosphate powder transportation:

1、Brief introduction of Phosphate powder transportation

Phosphate powder transportationis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，is a kind of Phosphate powder transportation manufactured by hyde。

Phosphate powder transportation

2、Phosphate powder transportation field real shot

Phosphate powder transportation picture at a glance, showing elegance.。

Phosphate powder transportation

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Phosphate powder transportation application

Phosphate powder transportations have the following purposes.

1. save energy and cut emissions

Although the Phosphate powder transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. material handling

Phosphate powder transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Reduce pollution

The Phosphate powder transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Bulk material transportation

The Phosphate powder transportation is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Phosphate powder transportation, these materials can be efficiently transferred between different production links or equipment.

5. save energy and cut emissions

Although the Phosphate powder transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Phosphate powder transportation

4、Structural characteristics of Phosphate powder transportation

The Phosphate powder transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Phosphate powder transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Phosphate powder transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Phosphate powder transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Phosphate powder transportation

5、Phosphate powder transportation explanation video

On-site aerial photography of Phosphate powder transportation。

Phosphate powder transportation

As you can see from the live video.，hyde powder is a kind of high quality and low price Phosphate powder transportation。

6、Functional advantages of Phosphate powder transportation

The advantages of Phosphate powder transportation are as follows:

1. Flexible layout

The Phosphate powder transportation is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

2. High conveying quality

In the process of conveying, the Phosphate powder transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

3. Multi-point to multi-point transportation

The Phosphate powder transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Small floor space

Compared with other transportation modes, the Phosphate powder transportation system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

5. versatility

The Phosphate powder transportation system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Phosphate powder transportations widely used in many industries.

Phosphate powder transportation

Phosphate powder transportationit is widely used in chemical plant, cast, building material, environmental protection and medicine，is a technology that uses the energy of air flow to continuously convey powdery and granular materials.。