Introduction to Ammonium chloride pneumatic conveying and pneumatic conveying advantages and features

Ammonium chloride pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

1、Brief introduction of Ammonium chloride pneumatic conveying

Ammonium chloride pneumatic conveyingis a technology that uses the energy of air flow to continuously convey powdery and granular materials.。

Ammonium chloride pneumatic conveying

2、Ammonium chloride pneumatic conveying performance advantage

The advantages of Ammonium chloride pneumatic conveying are as follows:

1. Multi-point to multi-point transportation

The Ammonium chloride pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Ammonium chloride pneumatic conveying.

3. Convenient maintenance and easy automation.

The Ammonium chloride pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

4. energy saving and environmental protection

In the process of Ammonium chloride pneumatic conveying opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. High degree of automation

The Ammonium chloride pneumatic conveying system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

Ammonium chloride pneumatic conveying

3、Structural advantages of Ammonium chloride pneumatic conveying

The Ammonium chloride pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Ammonium chloride pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ammonium chloride pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Ammonium chloride pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Ammonium chloride pneumatic conveying

4、Ammonium chloride pneumatic conveying explanation video

Speak directly with facts on the spot。

Ammonium chloride pneumatic conveying

As you can see from the live video.，hyde powder Widely used in Mixing and classification, Multi-point transportation, Long-distance and multipoint transportation, Process assistance and Bulk material transportation。

5、Ammonium chloride pneumatic conveying use

The purpose of Ammonium chloride pneumatic conveying is introduced as follows:

1. material handling

Ammonium chloride pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Mixing and classification

In the process of conveying, the Ammonium chloride pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Long-distance and multipoint transportation

The Ammonium chloride pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Ammonium chloride pneumatic conveyings have important application value in large factories and cross-regional material transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Ammonium chloride pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Reduce pollution

The Ammonium chloride pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Ammonium chloride pneumatic conveying

6、Introduction of advantages of Ammonium chloride pneumatic conveying

Ammonium chloride pneumatic conveyings have the following advantages.

1. Save space

Ammonium chloride pneumatic conveying equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

2. Multiple process operations can be carried out at the same time

In the process of conveying, the Ammonium chloride pneumatic conveying system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

3. High conveying quality

In the process of conveying, the Ammonium chloride pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. Improve conveying efficiency

The Ammonium chloride pneumatic conveying system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Ammonium chloride pneumatic conveying system can be seamlessly connected with other production equipment to improve the overall production efficiency.

Ammonium chloride pneumatic conveying

Ammonium chloride pneumatic conveyingthe product looks beautiful.，the advantage is The conveying system is closed.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Fully enclosed transportation system, materials are transported in closed pipes.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.。