Introduction to Sodium chlorate pneumatic conveying and pneumatic conveying system advantages and features

Sodium chlorate pneumatic conveyingis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，the product looks beautiful.，it is an ideal choice for customers to buy Sodium chlorate pneumatic conveying。The following is to introduce the Sodium chlorate pneumatic conveying:

1、Brief introduction of Sodium chlorate pneumatic conveying

Sodium chlorate pneumatic conveyingmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.。

Sodium chlorate pneumatic conveying

2、Sodium chlorate pneumatic conveying use

The purpose of Sodium chlorate pneumatic conveying is introduced as follows:

1. material handling

Sodium chlorate pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Mixing and classification

In the process of conveying, the Sodium chlorate pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Dust removal and purification

The Sodium chlorate pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Adapt to complex environment

The Sodium chlorate pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Sodium chlorate pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Reduce pollution

The Sodium chlorate pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Sodium chlorate pneumatic conveying

3、Sodium chlorate pneumatic conveying structure

The Sodium chlorate pneumatic conveying structure is introduced as follows:

1. control system

The control system is the "brain" of the Sodium chlorate pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Sodium chlorate pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Sodium chlorate pneumatic conveying

4、Structural characteristics of Sodium chlorate pneumatic conveying

The Sodium chlorate pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Sodium chlorate pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. control system

The control system is the "brain" of the Sodium chlorate pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sodium chlorate pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Sodium chlorate pneumatic conveying

5、Sodium chlorate pneumatic conveying principle

Sodium chlorate pneumatic conveyingat the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，is based on hyde is carefully developed by hyde powder combined with advanced technology。

Sodium chlorate pneumatic conveying

6、company introduction

hyde has many years of experience in Sodium chlorate pneumatic conveying production, and is a professional Sodium chlorate pneumatic conveying manufacturer. With favorable Sodium chlorate pneumatic conveying price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Sodium chlorate pneumatic conveying manufacturer in shandong(Province).。

hyde powder

Sodium chlorate pneumatic conveyingIt is mostly used in Long-distance and multipoint transportation, Process assistance, Reduce pollution, Dust removal and essence, Heating, cooling and drying, Long-distance and multipoint transportation and so on，it has the functions of Environmental protection and pollution-free, Physical processing assistance, Automatic control, Closed conveying and Explosion-proof involves。