What is a Feed pneumatic conveying? Introduction to the advantages, characteristics, and principles of the pneumatic conveying system

Feed pneumatic conveyingis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.。

1、Brief introduction of Feed pneumatic conveying

Feed pneumatic conveyingthat is, the technology of conveying granular materials in closed pipes by air flow.，Widely used in Long-distance and multipoint transportation, material handling, Long distance transportation, Environmental protection and cleaner production and Heating, cooling and drying，support customization。

Feed pneumatic conveying

2、Feed pneumatic conveying structure composition

The Feed pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Feed pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Feed pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Feed pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Feed pneumatic conveying

3、Video analysis of Feed pneumatic conveying

Speak directly with facts on the spot。

Feed pneumatic conveying

As you can see from the live video.，hyde It can be used for Bulk material transportation, Mixing and classification, Dust removal and essence, material handling, Long-distance and multipoint transportation, Reduce pollution and so on。

4、Feed pneumatic conveying application

Feed pneumatic conveyings have the following purposes.

1. Reduce pollution

The Feed pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Bulk material transportation

The Feed pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Feed pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

3. cut down on energy consumption

Although the power consumption of the Feed pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Multi-point transportation

The Feed pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. save energy and cut emissions

Although the Feed pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Feed pneumatic conveying

5、Feed pneumatic conveying HD picture

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Feed pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Brief introduction of hyde

hyde powder, as one of the professional and powerful Feed pneumatic conveying manufacturers in jinan, produces Feed pneumatic conveying with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

hyde

Feed pneumatic conveyingthe product looks atmospheric.，is a common Feed pneumatic conveying。