What is a Ceramic pneumatic conveying? Introduction to the principle of Powder pneumatic conveying structure

Ceramic pneumatic conveyingis a technology to transport solid particulate materials through air flow.，the product looks atmospheric.，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of Air source system, Bunker system, Bunker system, control system and Air source system，it is widely used in chemical plant, chemical industry, machine building, heat-engine plant and plastic，is a common Ceramic pneumatic conveying。The following is to introduce the Ceramic pneumatic conveying:

1、Brief introduction of Ceramic pneumatic conveying

Ceramic pneumatic conveyingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the advantage is It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、Can realize the transportation of materials in a closed pipeline.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point discharging, and realize long-distance operation.、The material is completely closed in the whole conveying process.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.，at runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。

Ceramic pneumatic conveying

2、Ceramic pneumatic conveying application

Ceramic pneumatic conveyings have the following purposes.

1. Process assistance

In some production processes, Ceramic pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Ceramic pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

2. Long-distance and multipoint transportation

The Ceramic pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Ceramic pneumatic conveyings have important application value in large factories and cross-regional material transportation.

3. cut down on energy consumption

Although the power consumption of the Ceramic pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. material handling

Ceramic pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Environmental protection and cleaner production

The Ceramic pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Ceramic pneumatic conveying

3、Ceramic pneumatic conveying work site real shot

Take a look at the beautiful pictures of the Ceramic pneumatic conveying, showing the product style.。

Ceramic pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Ceramic pneumatic conveying structure composition

The Ceramic pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ceramic pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ceramic pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Ceramic pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Ceramic pneumatic conveying

5、Ceramic pneumatic conveying price concessions

The Ceramic pneumatic conveying price is introduced as follows:

1. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. sales mode

hyde powder Ceramic pneumatic conveying manufacturer is a self-produced and self-selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Ceramic pneumatic conveying price is also low.

3. quality

The Ceramic pneumatic conveying is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. hyde has always adhered to high quality in the construction of Ceramic pneumatic conveying and won the trust of customers.

4. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. cost of production

The cost of manufacturing Ceramic pneumatic conveying varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

Ceramic pneumatic conveying

6、hyde delivery site

The following is the live video of Ceramic pneumatic conveying designed and produced by hyde powder for users, from which we can see the Large conveying capacity, long conveying distance and high conveying quality.、In the process of conveying, various technological operations can be carried out at the same time, such as cool.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Can be charged at one place and then discharged at multiple places.、The conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation. of Ceramic pneumatic conveying.。

Ceramic pneumatic conveying

As you can see from the live video.hyde is a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.。

Ceramic pneumatic conveyingis a popular Ceramic pneumatic conveying，Commonly used inDust removal and essence,Process assistance,Heating, cooling and drying,Process assistance,cut down on energy consumption and so on，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。