What is a Garbage transportation? Introduction to the Working Principle of Powder pneumatic conveying

Garbage transportationis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，features include Low energy consumption, Save manpower, Quantitative transportation, Easy maintenance and Easy to automate management，it is widely used in chemical plant, machine building, build a ship, cast, chemical industry and other industries，the advantage is The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Closed pipeline transportation，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.，is based on hyde is carefully developed by hyde powder combined with advanced technology。

1、Brief introduction of Garbage transportation

Garbage transportationis a method of conveying materials through pipelines by using air flow with a certain speed.。

Garbage transportation

2、Garbage transportation application

Garbage transportations have the following purposes.

1. save energy and cut emissions

Although the Garbage transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Multi-point transportation

The Garbage transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Reduce pollution

The Garbage transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Garbage transportation pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. material handling

Garbage transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Garbage transportation

3、Garbage transportation performance advantage

Garbage transportations have the following advantages.

1. energy saving and environmental protection

Compared with the traditional mechanical transportation mode, the Garbage transportation has higher transportation efficiency, which can reduce transportation time and transportation cost. Moreover, the Garbage transportation does not need additional power to drive, which reduces energy consumption.

2. High conveying efficiency

The Garbage transportation can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

3. High conveying quality

In the process of conveying, the Garbage transportation system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

4. Flexible layout

The Garbage transportation is carried out in a closed pipeline, which effectively reduces the flying and escape of dust, improves the working environment, reduces environmental pollution, and also protects materials from external pollution.

5. Save space

Garbage transportation equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

Garbage transportation

4、Garbage transportation HD picture

Garbage transportation styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Garbage transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Structural advantages of Garbage transportation

The Garbage transportation has the following structure

1. control system

The control system is the "brain" of the Garbage transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Garbage transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Garbage transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Garbage transportation

6、Garbage transportation price consultation

The Garbage transportation price is introduced as follows:

1. specifications and models

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

2. Company size

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. hyde powder's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

3. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

4. quality

The quality of the Garbage transportation is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Garbage transportation price.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Garbage transportation

Garbage transportationmultifunctional, with functions such as Explosion-proof involves, Automatic control, material handling, Physical processing assistance and Closed conveying，the principle is simple.The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。