What is a Peanut pneumatic conveying? pneumatic conveying system specifications, models, and parameters

Peanut pneumatic conveyingis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the advantage is Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、In the conveying process, various technological operations can be carried out at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、PLC intelligent control, high degree of automation and simple operation.、The conveying system is closed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.。

1、Brief introduction of Peanut pneumatic conveying

Peanut pneumatic conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，it has been widely used in building materials, grain processing, heat-engine plant, metallurgy, pharmaceutical factory and other industries，in the course of work,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，it mainly includes Bunker system, dust pelletizing system, control system, Air source system and delivery system，This productThe overall structural design is relatively simple，It has a wide range of uses, including Heating, cooling and drying, Reduce pollution, cut down on energy consumption, Reduce pollution and Heating, cooling and drying。

Peanut pneumatic conveying

2、Structural advantages of Peanut pneumatic conveying

The Peanut pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Peanut pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Peanut pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Peanut pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Peanut pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Peanut pneumatic conveying

3、Peanut pneumatic conveying performance advantage

Peanut pneumatic conveyings have the following advantages.

1. Generality

Peanut pneumatic conveyings are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Peanut pneumatic conveying system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

2. Easy to maintain

The Peanut pneumatic conveying device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

3. High conveying efficiency and low cost.

The Peanut pneumatic conveying can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

4. Small floor space

Compared with other transportation modes, the Peanut pneumatic conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

5. Strong adaptability

For materials with unstable chemical properties, the Peanut pneumatic conveying system can use inert gas for transportation to ensure the stability of the materials during transportation.

Peanut pneumatic conveying

4、Peanut pneumatic conveying function

Peanut pneumatic conveyingit has the functions of Explosion-proof involves, Environmental protection and pollution-free, Closed conveying, material handling and Automatic control，is a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，it is an ideal choice for customers to buy Peanut pneumatic conveying。

Peanut pneumatic conveying

5、Structural characteristics of Peanut pneumatic conveying

The Peanut pneumatic conveying has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Peanut pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Peanut pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Peanut pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Peanut pneumatic conveying

6、Peanut pneumatic conveying use

The purpose of Peanut pneumatic conveying is introduced as follows:

1. Mixing and classification

In the process of conveying, the Peanut pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Long-distance and multipoint transportation

The Peanut pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Peanut pneumatic conveyings have important application value in large factories and cross-regional material transportation.

3. Multi-point transportation

The Peanut pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. cut down on energy consumption

Although the power consumption of the Peanut pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. material handling

Peanut pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Peanut pneumatic conveying

Peanut pneumatic conveyingthe main features are Save manpower, energy saving and environmental protection, Less maintenance., Reduce material loss and Low energy consumption，Can be transported from one point to one place or from one point to many points.、The operation mode is flexible and changeable, and it can run continuously or regularly.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Fully enclosed transportation system, materials are transported in closed pipes.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.。