Introduction to Dry desulfurization and denitrification transportation, pneumatic conveying advantages, characteristics and principles

Dry desulfurization and denitrification transportationis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，the advantage is In the conveying process, various technological operations can be carried out at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、The material is completely closed in the whole conveying process.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，the product looks beautiful.，It can be used for Heating, cooling and drying, material handling, Environmental protection and cleaner production, Reduce pollution, Long-distance and multipoint transportation, Bulk material transportation and so on，it is widely used in environmental protection, machine building, logistics, metallurgy and pharmaceutical factory。The following is to introduce the Dry desulfurization and denitrification transportation:

1、Brief introduction of Dry desulfurization and denitrification transportation

Dry desulfurization and denitrification transportationis a material conveying system that uses the pressure of gas to convey powder materials.，is developed and improved by hyde powder。

Dry desulfurization and denitrification transportation

2、Introduction of Dry desulfurization and denitrification transportation characteristics

Dry desulfurization and denitrification transportationGood dustproof effect,The failure rate is low,automation,Simple system,Quantitative transportation，The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Can be transported from point to point or from point to point, and realize long-distance operation.、Materials are transported by closed pipelines.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、PLC intelligent control, high degree of automation and simple operation.。

Dry desulfurization and denitrification transportation

3、Dry desulfurization and denitrification transportation application

Dry desulfurization and denitrification transportations have the following purposes.

1. Dust removal and purification

The Dry desulfurization and denitrification transportation system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. Environmental protection and cleaner production

The Dry desulfurization and denitrification transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. Reduce pollution

The Dry desulfurization and denitrification transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Process assistance

In some production processes, Dry desulfurization and denitrification transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Dry desulfurization and denitrification transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. cut down on energy consumption

Although the power consumption of the Dry desulfurization and denitrification transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Dry desulfurization and denitrification transportation

4、Dry desulfurization and denitrification transportation structure composition

The Dry desulfurization and denitrification transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dry desulfurization and denitrification transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Dry desulfurization and denitrification transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Dry desulfurization and denitrification transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Dry desulfurization and denitrification transportation

5、Dry desulfurization and denitrification transportation principle

Dry desulfurization and denitrification transportationat runtime,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，features include versatility, Flexible conveying distance, Simple operation, Low energy consumption and automation。

Dry desulfurization and denitrification transportation

6、hyde's strength

The company has many years of Dry desulfurization and denitrification transportation manufacturing experience, large scale and strong strength.。

hyde powder

Dry desulfurization and denitrification transportationit has the structure of Air source system, Conveying pipeline system, Bunker system, dust pelletizing system and Air source system，it has been widely used in cast, grain processing, chemical plant, plastic, building material and other industries，by forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。