What is a Transportation in the new energy industry? How much is the price of the pneumatic conveying system?

Transportation in the new energy industryalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.，the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.、The materials are completely sealed during transportation.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.、Can be transported from one point to one place or from one point to many points.、Materials are transported in a closed pipeline.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，is carefully developed by hyde powder combined with advanced technology。The following is to introduce the Transportation in the new energy industry:

1、Brief introduction of Transportation in the new energy industry

Transportation in the new energy industryis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，multifunctional, with functions such as material handling, Closed conveying, Automatic control, Environmental protection and pollution-free and Physical processing assistance，usually used in power, chemical plant, heat-engine plant, plastic, metallurgy and other fields，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，has been favored by more and more customers.。

Transportation in the new energy industry

2、Transportation in the new energy industry function

Transportation in the new energy industryit has the functions of Physical processing assistance, Closed conveying, Explosion-proof involves, Automatic control and Environmental protection and pollution-free，it is mainly composed of control system, Conveying pipeline system, delivery system, dust pelletizing system and Bunker system，is a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.。

Transportation in the new energy industry

3、Structural characteristics of Transportation in the new energy industry

The Transportation in the new energy industry structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Transportation in the new energy industry system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Transportation in the new energy industry system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Transportation in the new energy industry

4、Transportation in the new energy industry use

The purpose of Transportation in the new energy industry is introduced as follows:

1. cut down on energy consumption

Although the power consumption of the Transportation in the new energy industry is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. Long distance transportation

The Transportation in the new energy industry system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Bulk material transportation

The Transportation in the new energy industry is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Transportation in the new energy industry, these materials can be efficiently transferred between different production links or equipment.

4. Multi-point transportation

The Transportation in the new energy industry system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Reduce pollution

The Transportation in the new energy industry system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Transportation in the new energy industry

5、Introduction of advantages of Transportation in the new energy industry

Transportation in the new energy industrys have the following advantages.

1. Various process operations can be realized.

The Transportation in the new energy industry system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Transportation in the new energy industrys widely used in many industries.

2. Structural construction

Transportation in the new energy industry has simple structure and convenient operation.

3. Easy to maintain

The Transportation in the new energy industry system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

4. Environmental protection and pollution-free

In the process of Transportation in the new energy industry opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Transportation in the new energy industry system can be seamlessly connected with other production equipment to improve the overall production efficiency.

Transportation in the new energy industry

6、hyde workshop real shot

On-site aerial photography of Transportation in the new energy industry。

Transportation in the new energy industry

As you can see from the live video.hyde the product looks atmospheric.。

Transportation in the new energy industryat work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，is a Transportation in the new energy industry，is a kind of high quality and low price Transportation in the new energy industry。