Introduction to Pneumatic conveying in chemical plants and Pneumatic conveying equipment structure principle

Pneumatic conveying in chemical plantsis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，the product looks atmospheric.，The overall structural design is simple, diverse and beautiful.，it is usually composed of dust pelletizing system, control system, Bunker system, Conveying pipeline system and delivery system，the product looks beautiful.，is developed and improved by hyde powder。The following is to introduce the Pneumatic conveying in chemical plants:

1、Brief introduction of Pneumatic conveying in chemical plants

Pneumatic conveying in chemical plantsis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，Cheap and high quality。

Pneumatic conveying in chemical plants

2、Pneumatic conveying in chemical plants principle

Pneumatic conveying in chemical plantsat runtime,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，the main structure includes dust pelletizing system, Bunker system, delivery system, Conveying pipeline system and control system。

Pneumatic conveying in chemical plants

3、Pneumatic conveying in chemical plants use

The purpose of Pneumatic conveying in chemical plants is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Pneumatic conveying in chemical plants pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Reduce pollution

The Pneumatic conveying in chemical plants system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Multi-point transportation

The Pneumatic conveying in chemical plants system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Mixing and classification

In the process of conveying, the Pneumatic conveying in chemical plants system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. cut down on energy consumption

Although the power consumption of the Pneumatic conveying in chemical plants is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Pneumatic conveying in chemical plants

4、Pneumatic conveying in chemical plants characteristics

Pneumatic conveying in chemical plantsfeatures include Easy to use, Simple system, No secondary pollution, Convenient maintenance and automation。

Pneumatic conveying in chemical plants

5、Pneumatic conveying in chemical plants structure composition

The Pneumatic conveying in chemical plants structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Pneumatic conveying in chemical plants system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. control system

The control system is the "brain" of the Pneumatic conveying in chemical plants system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Pneumatic conveying in chemical plants

6、Pneumatic conveying in chemical plants structure

The Pneumatic conveying in chemical plants structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying in chemical plants system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying in chemical plants system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Pneumatic conveying in chemical plants

Pneumatic conveying in chemical plantsis a popular Pneumatic conveying in chemical plants，It can be used for Environmental protection and cleaner production, Process assistance, cut down on energy consumption, Long-distance and multipoint transportation, Mixing and classification, Dust removal and essence and so on，the product looks atmospheric.。