What is a Coal furnace ash pneumatic conveying? How much is the price of the Material conveying?

Coal furnace ash pneumatic conveyingis a kind of material conveying equipment which combines jet technology and fluidization technology.，it has been widely used in medicine, chemical plant, chemical industry, building materials, logistics and other industries，features include Fast conveying speed, Economic and environmental protection, automation, Easy to use and High production efficiency，the advantage is Fully enclosed transportation system, materials are transported in closed pipes.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Can be fed from one place to many places for decentralized transportation.、The conveying system is closed.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.，it is mainly composed of Air source system, control system, dust pelletizing system, Bunker system and dust pelletizing system。

1、Brief introduction of Coal furnace ash pneumatic conveying

Coal furnace ash pneumatic conveyingIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，at runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。

Coal furnace ash pneumatic conveying

2、Advantages of Coal furnace ash pneumatic conveying principle

Coal furnace ash pneumatic conveyingin the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，widely used inenvironmental protection,build a ship,machine building,building material,grain processing and other industries，the product looks atmospheric.，the product looks beautiful.，multifunctional, with functions such as Closed conveying, Automatic control, Explosion-proof involves, Explosion-proof involves and material handling。

Coal furnace ash pneumatic conveying

3、Coal furnace ash pneumatic conveying structure composition

The Coal furnace ash pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Coal furnace ash pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Coal furnace ash pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Coal furnace ash pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Coal furnace ash pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Coal furnace ash pneumatic conveying

4、Introduction of Coal furnace ash pneumatic conveying characteristics

Coal furnace ash pneumatic conveyingLarge conveying capacity,Easy to realize automation,Less maintenance.,easy installation,Simple system，is a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，The material is completely closed in the whole conveying process.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、It can be discharged at a single point or at multiple points.、PLC intelligent control, high degree of automation and simple operation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.。

Coal furnace ash pneumatic conveying

5、Coal furnace ash pneumatic conveying function

Coal furnace ash pneumatic conveyingmultifunctional, with functions such as Automatic control, material handling, Automatic control, Physical processing assistance and Closed conveying，Can realize the transportation of materials in a closed pipeline.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Can realize the transportation of materials in a closed pipeline.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.。

Coal furnace ash pneumatic conveying

Coal furnace ash pneumatic conveyingthe advantage is In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、Materials are transported in a closed pipeline.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as cool.，Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，it has the functions of Explosion-proof involves, Environmental protection and pollution-free, material handling, Environmental protection and pollution-free and Physical processing assistance。