What is a Centrifugal fan conveying? Introduction to the advantages and characteristics of the Powder conveying

Centrifugal fan conveyingis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，was developed and designed by hyde powder。

1、Brief introduction of Centrifugal fan conveying

Centrifugal fan conveyingIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，the product looks beautiful.，can be customized according to user's needs.。

Centrifugal fan conveying

2、Introduction of advantages of Centrifugal fan conveying

Centrifugal fan conveyings have the following advantages.

1. The quality of convey materials is ensure.

In the process of conveying, the Centrifugal fan conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

2. Totally enclosed conveying

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

3. Strong adaptability

The Centrifugal fan conveying system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

4. High conveying efficiency and low cost.

The Centrifugal fan conveying system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Centrifugal fan conveyings can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

5. High degree of automation

Centrifugal fan conveyings can realize the automation of transportation process through program control and automation technology. In the whole transportation process, there is no need for manual intervention, and the degree of automation is very high.

Centrifugal fan conveying

3、Centrifugal fan conveying structure

The Centrifugal fan conveying has the following structure

1. control system

The control system is the "brain" of the Centrifugal fan conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Centrifugal fan conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Centrifugal fan conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Centrifugal fan conveying

4、Centrifugal fan conveying application

Centrifugal fan conveyings have the following purposes.

1. Multi-point transportation

The Centrifugal fan conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Process assistance

In some production processes, Centrifugal fan conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Centrifugal fan conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

3. save energy and cut emissions

Although the Centrifugal fan conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Adapt to complex environment

The Centrifugal fan conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Centrifugal fan conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. cut down on energy consumption

Although the power consumption of the Centrifugal fan conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Centrifugal fan conveying

5、Working principle of Centrifugal fan conveying

Centrifugal fan conveyingat the start of the operation,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，has been favored by more and more customers.。

Centrifugal fan conveying

Centrifugal fan conveyingis a kind of high quality and low price Centrifugal fan conveying，It has a wide range of uses, and is often used inmaterial handling,Long-distance and multipoint transportation,material handling,cut down on energy consumption,Process assistance and so on。