What is a Intelligent pneumatic conveying equipment? How much is the price of the pneumatic conveying system?

Intelligent pneumatic conveying equipmentis a technology that uses the energy of air flow to continuously convey powdery and granular materials.，support customization。The following is to introduce the Intelligent pneumatic conveying equipment:

1、Brief introduction of Intelligent pneumatic conveying equipment

Intelligent pneumatic conveying equipmentis an efficient and environment-friendly way to transport materials by using the energy of airflow.，at runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，usually used in heat-engine plant, transportation, metallurgy, building material, chemical industry and other fields，It has the functions of Reduce pollution, Heating, cooling and drying, Dust removal and essence, Reduce pollution and cut down on energy consumption，it has been widely used in medicine, cast, power, build a ship, chemical industry and other industries。

Intelligent pneumatic conveying equipment

2、Introduction of advantages of Intelligent pneumatic conveying equipment

Intelligent pneumatic conveying equipments have the following advantages.

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Intelligent pneumatic conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. Convenient maintenance and easy automation.

The Intelligent pneumatic conveying equipment device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

3. Multi-point to multi-point transportation

The Intelligent pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Wide application range

For materials with unstable chemical properties, the Intelligent pneumatic conveying equipment system can use inert gas for transportation to ensure the stability of the materials during transportation.

5. Improve conveying efficiency

The Intelligent pneumatic conveying equipment system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

Intelligent pneumatic conveying equipment

3、Intelligent pneumatic conveying equipment function

Intelligent pneumatic conveying equipmentmultifunctional, with functions such as Closed conveying, Environmental protection and pollution-free, material handling, Automatic control and Physical processing assistance，Fully enclosed transportation system, materials are transported in closed pipes.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、The materials are completely sealed during transportation.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.。

Intelligent pneumatic conveying equipment

4、Intelligent pneumatic conveying equipment structure composition

The Intelligent pneumatic conveying equipment has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Intelligent pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Intelligent pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Intelligent pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Intelligent pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Intelligent pneumatic conveying equipment

5、Intelligent pneumatic conveying equipment introduction video

You can buy Intelligent pneumatic conveying equipment according to your needs and show you product videos.。

Intelligent pneumatic conveying equipment

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the main features are Less maintenance., Economic and environmental protection, be of simple construction, Low energy consumption and Stable operation。

6、Intelligent pneumatic conveying equipment price concessions

The Intelligent pneumatic conveying equipment price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Intelligent pneumatic conveying equipment have more or less differences in price.

2. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. market

The market demand has a certain impact on the price of Intelligent pneumatic conveying equipment. When there are many customers who need Intelligent pneumatic conveying equipment in the market, there will be a phenomenon that demand exceeds supply, and then the price of Intelligent pneumatic conveying equipment will become higher. On the contrary, when there are very few customers who need Intelligent pneumatic conveying equipment, there will be a phenomenon of oversupply, and the price of Intelligent pneumatic conveying equipment will be reduced.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Intelligent pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Intelligent pneumatic conveying equipment price can meet the purchasing needs of customers.

Intelligent pneumatic conveying equipment

Intelligent pneumatic conveying equipmentwidely used inpharmaceutical factory,power,transportation,building materials,cast and other industries，It has a wide range of uses, and is often used inBulk material transportation,Process assistance,Environmental protection and cleaner production,Long-distance and multipoint transportation,Long distance transportation and so on，it has the functions of Explosion-proof involves, Closed conveying, material handling, Physical processing assistance and Environmental protection and pollution-free。