What is a Suction and pressure mixed pneumatic conveying system? Introduction to the principle of Powder conveying structure

Suction and pressure mixed pneumatic conveying systemIt uses air energy to continuously convey powder and bulk materials.，In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、PLC intelligent control, high degree of automation and simple operation.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、Fully enclosed transportation system, materials are transported in closed pipes.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.，usually used in machine building, transportation, building material, build a ship, plastic and other fields，widely used inpower,heat-engine plant,grain processing,cast,building materials and other industries，be loved by our customers.。

1、Brief introduction of Suction and pressure mixed pneumatic conveying system

Suction and pressure mixed pneumatic conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，was developed and designed by hyde powder。

Suction and pressure mixed pneumatic conveying system

2、Introduction of Suction and pressure mixed pneumatic conveying system characteristics

Suction and pressure mixed pneumatic conveying systemit has the characteristics of High conveying efficiency, be of simple construction, Less maintenance., Simple operation and Large conveying capacity，the principle is simple.It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，favorable price。

Suction and pressure mixed pneumatic conveying system

3、Suction and pressure mixed pneumatic conveying system application

Suction and pressure mixed pneumatic conveying systems have the following purposes.

1. Dust removal and purification

The Suction and pressure mixed pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. cut down on energy consumption

Although the power consumption of the Suction and pressure mixed pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Long-distance and multipoint transportation

The Suction and pressure mixed pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Suction and pressure mixed pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

4. material handling

Suction and pressure mixed pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Bulk material transportation

The Suction and pressure mixed pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Suction and pressure mixed pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

Suction and pressure mixed pneumatic conveying system

4、Suction and pressure mixed pneumatic conveying system function

Suction and pressure mixed pneumatic conveying systemmultifunctional, with functions such as Closed conveying, Automatic control, Explosion-proof involves, Environmental protection and pollution-free and material handling，is a common Suction and pressure mixed pneumatic conveying system，the main features are Save manpower, It is convenient to realize mechanization, Easy maintenance, Quantitative transportation and Strong adaptability，Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.、In the process of conveying, various technological operations can be carried out at the same time, such as cool.、The conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Materials are transported by closed pipelines.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，it is an ideal choice for customers to buy Suction and pressure mixed pneumatic conveying system。

Suction and pressure mixed pneumatic conveying system

5、Structural advantages of Suction and pressure mixed pneumatic conveying system

The Suction and pressure mixed pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Suction and pressure mixed pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Suction and pressure mixed pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Suction and pressure mixed pneumatic conveying system

6、Suction and pressure mixed pneumatic conveying system function

Suction and pressure mixed pneumatic conveying systemit has the functions of Physical processing assistance, Closed conveying, Environmental protection and pollution-free, Explosion-proof involves and material handling，it is widely used in cast, pharmaceutical factory, grain processing, power, environmental protection and other industries，is a Suction and pressure mixed pneumatic conveying system newly developed by hyde。

Suction and pressure mixed pneumatic conveying system

Suction and pressure mixed pneumatic conveying systemIt has the functions of material handling, Multi-point transportation, Bulk material transportation, Dust removal and essence and cut down on energy consumption，the advantage is The pipeline layout is flexible, and it can be arranged according to the specific terrain.、In the conveying process, various technological operations can be carried out at the same time.、The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Multi-point feeding and multi-point discharging are possible.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation。