Introduction to Automatic mixing and conveying equipment, pneumatic conveying system advantages, characteristics and principles

Automatic mixing and conveying equipmentis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the main features are High system reliability, Flexible conveying distance, Reduce material loss, Flexible transmission line and High productivity，has been favored by more and more customers.。The following is to introduce the Automatic mixing and conveying equipment:

1、Brief introduction of Automatic mixing and conveying equipment

Automatic mixing and conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，the product looks beautiful.。

Automatic mixing and conveying equipment

2、Automatic mixing and conveying equipment structure composition

The Automatic mixing and conveying equipment has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Automatic mixing and conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Automatic mixing and conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Automatic mixing and conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Automatic mixing and conveying equipment

3、Automatic mixing and conveying equipment HD real shot

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Automatic mixing and conveying equipment production process and production site, and gain favorable comments and recognition from customers.。

Automatic mixing and conveying equipment

As you can see from the live video.，hyde powder is an advanced technology for conveying materials by aerodynamic force.。

4、Automatic mixing and conveying equipment function

Automatic mixing and conveying equipmentit has the functions of Closed conveying, Environmental protection and pollution-free, Physical processing assistance, Explosion-proof involves and Automatic control，in the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，the main structure includes Air source system, Conveying pipeline system, control system, dust pelletizing system and delivery system，This Automatic mixing and conveying equipmentSimple structure and reliable operation.。

Automatic mixing and conveying equipment

5、Automatic mixing and conveying equipment use

The purpose of Automatic mixing and conveying equipment is introduced as follows:

1. Long distance transportation

The Automatic mixing and conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Reduce pollution

The Automatic mixing and conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. save energy and cut emissions

Although the Automatic mixing and conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Adapt to complex environment

The Automatic mixing and conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Automatic mixing and conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Automatic mixing and conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Automatic mixing and conveying equipment

6、Automatic mixing and conveying equipment price consultation

The Automatic mixing and conveying equipment price is introduced as follows:

1. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. Model specification

The same product, different specifications and models, the performance of the product is different, therefore, manufacturers need different costs in producing and manufacturing products, so the prices of different specifications and models are different, and customers should give priority to suitability when purchasing.

3. Manufacturer's strength

hyde's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Automatic mixing and conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Automatic mixing and conveying equipment price can meet the purchasing needs of customers.

5. model

There are several specifications and models of Automatic mixing and conveying equipment, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Automatic mixing and conveying equipment, and the budget and other requirements recommend suitable Automatic mixing and conveying equipment for everyone.

Automatic mixing and conveying equipment

Automatic mixing and conveying equipmentit is widely used in pharmaceutical factory, cast, build a ship, building material and building materials，it mainly includes Conveying pipeline system, Air source system, control system, Bunker system and Bunker system，in the course of work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.。