Introduction to Small particle transportation and pneumatic conveying advantages and features

Small particle transportationIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，the main features are easy installation, Simple operation, Flexible transmission line, Long conveying distance and Can carry out long-distance dispersion transportation.，The price is low and affordable，modern technology。The following is to introduce the Small particle transportation:

1、Brief introduction of Small particle transportation

Small particle transportationis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，has been favored by more and more customers.。

Small particle transportation

2、Small particle transportation advantage

The advantages of Small particle transportation are as follows:

1. Environmental protection and pollution-free

In the process of Small particle transportation opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

2. structure

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. Multi-point to multi-point transportation

The Small particle transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. High conveying efficiency and low cost.

The continuity and high efficiency of the Small particle transportation enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

5. versatility

In the process of conveying, the Small particle transportation system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

Small particle transportation

3、Small particle transportation structure

The Small particle transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Small particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Small particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Small particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Small particle transportation

4、Small particle transportation principle

Small particle transportationthe principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is carefully developed by hyde combined with advanced technology。

Small particle transportation

5、Small particle transportation function

Small particle transportationmultifunctional, with functions such as Automatic control, Physical processing assistance, Environmental protection and pollution-free, Closed conveying and Explosion-proof involves。

Small particle transportation

6、How much is the Small particle transportation?

The Small particle transportation price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Small particle transportation have more or less differences in price.

4. geographical position

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

5. market factors

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Small particle transportation price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

Small particle transportation

Small particle transportationis a common Small particle transportation，It is a product series that integrates Mixing and classification, Multi-point transportation, Long-distance and multipoint transportation, Reduce pollution and Dust removal and essence，it has the functions of Closed conveying, Environmental protection and pollution-free, material handling, Automatic control and Physical processing assistance。