Introduction to Intermittent conveying system, Material conveying advantages, characteristics and principles

Intermittent conveying systemis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，be of high quality。

1、Brief introduction of Intermittent conveying system

Intermittent conveying systemis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.。

Intermittent conveying system

2、On-site real shot of Intermittent conveying system

Various styles and styles of Intermittent conveying system, complete models, for you to choose at will.。

Intermittent conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Intermittent conveying system structure

The Intermittent conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. control system

The control system is the "brain" of the Intermittent conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Intermittent conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Intermittent conveying system

4、Intermittent conveying system advantage

The advantages of Intermittent conveying system are as follows:

1. Multi-point to multi-point transportation

The Intermittent conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Generality

The Intermittent conveying system system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

3. Material quality protection

In the process of conveying, the Intermittent conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

4. Save space

Compared with other transportation modes, the Intermittent conveying system system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

5. High conveying efficiency and low cost.

The Intermittent conveying system can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

Intermittent conveying system

5、Intermittent conveying system principle

Intermittent conveying systemat the start of the operation,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，It can be used for Process assistance, Environmental protection and cleaner production, cut down on energy consumption, Long-distance and multipoint transportation, Dust removal and essence, Long distance transportation and so on，is a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，has been favored by more and more customers.。

Intermittent conveying system

6、Intermittent conveying system price advantage

The Intermittent conveying system price is introduced as follows:

1. market supply and demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Intermittent conveying system. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

2. Brand strength

At present, there are various brands of Intermittent conveying system in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Intermittent conveying system are different.

3. Product configuration difference

The difference in Intermittent conveying system configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. Manufacturer's strength

The nature of the manufacturer can also greatly affect the price of the Intermittent conveying system. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Intermittent conveying system

Intermittent conveying systemWidely used in material handling, Mixing and classification, Bulk material transportation, Multi-point transportation and Reduce pollution，it has the characteristics of Fast conveying speed, Flexible pipeline layout, High degree of automation, Reliable operation and Easy to realize automation。