What is a Fully automatic measuring and conveying equipment? Introduction to the principle of Pneumatic conveying equipment structure

Fully automatic measuring and conveying equipmentis a material conveying device that uses the pressure of gas to convey powder materials.，is a Fully automatic measuring and conveying equipment，the product looks beautiful.，the main features are High system reliability, The failure rate is low, High production efficiency, omniseal and Convenient for material transportation and recovery.，it is widely used inenvironmental protection,transportation,cast,pharmaceutical factory,power and other industries。

1、Brief introduction of Fully automatic measuring and conveying equipment

Fully automatic measuring and conveying equipmentis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，The material is completely closed in the whole conveying process.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、Closed pipeline transportation，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.。

Fully automatic measuring and conveying equipment

2、Working principle of Fully automatic measuring and conveying equipment

Fully automatic measuring and conveying equipmentat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，multifunctional, with functions such as Automatic control, material handling, Physical processing assistance, Explosion-proof involves and Environmental protection and pollution-free，is an efficient and environment-friendly way to transport materials by using the energy of airflow.。

Fully automatic measuring and conveying equipment

3、Fully automatic measuring and conveying equipment work site real shot

The following picture is a panoramic shot of hyde Fully automatic measuring and conveying equipment,the product looks beautiful., which is trustworthy.。

Fully automatic measuring and conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Fully automatic measuring and conveying equipment principle

Fully automatic measuring and conveying equipmentat the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，generally, it is composed of dust pelletizing system, control system, Air source system, dust pelletizing system, Bunker system and other major components，Fully automatic measuring and conveying equipmentSimple structure and reliable operation.。

Fully automatic measuring and conveying equipment

5、Structural advantages of Fully automatic measuring and conveying equipment

The Fully automatic measuring and conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Fully automatic measuring and conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Fully automatic measuring and conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Fully automatic measuring and conveying equipment

6、Fully automatic measuring and conveying equipment structure

The Fully automatic measuring and conveying equipment structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Fully automatic measuring and conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Fully automatic measuring and conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Fully automatic measuring and conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Fully automatic measuring and conveying equipment

Fully automatic measuring and conveying equipmentis a kind of high quality and low price Fully automatic measuring and conveying equipment，the advantage is The pipeline layout is flexible, and it can be arranged according to the specific terrain.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、The whole conveying process is sealed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.。