Introduction to Fly ash particle conveying system, Material conveying advantages, characteristics and principles

Fly ash particle conveying systemis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。

1、Brief introduction of Fly ash particle conveying system

Fly ash particle conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as smash.、Can be charged at one place and then discharged at multiple places.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，is a kind of Fly ash particle conveying system manufactured by hyde。

Fly ash particle conveying system

2、Functional advantages of Fly ash particle conveying system

The advantages of Fly ash particle conveying system are as follows:

1. Multi-point to multi-point transportation

The Fly ash particle conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. Save space

Fly ash particle conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. Low maintenance cost

The Fly ash particle conveying system system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. energy saving and environmental protection

Because the Fly ash particle conveying system is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

Fly ash particle conveying system

3、Fly ash particle conveying system use

The purpose of Fly ash particle conveying system is introduced as follows:

1. Long distance transportation

The Fly ash particle conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Multi-point transportation

The Fly ash particle conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Bulk material transportation

The Fly ash particle conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Fly ash particle conveying system, these materials can be efficiently transferred between different production links or equipment.

4. Reduce pollution

The Fly ash particle conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Dust removal and purification

The Fly ash particle conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Fly ash particle conveying system

4、Fly ash particle conveying system structure

The Fly ash particle conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Fly ash particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Fly ash particle conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Fly ash particle conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Fly ash particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Fly ash particle conveying system

5、Fly ash particle conveying system principle

Fly ash particle conveying systemat work,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。

Fly ash particle conveying system

Fly ash particle conveying systemIntermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The whole conveying process is sealed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation，widely used in logistics, build a ship, pharmaceutical factory, plastic, chemical industry and other fields。