Introduction to Suction pressure mixed pneumatic conveying, pneumatic conveying system specifications, model parameters

Suction pressure mixed pneumatic conveyingis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，the product looks beautiful.。The following is to introduce the Suction pressure mixed pneumatic conveying:

1、Brief introduction of Suction pressure mixed pneumatic conveying

Suction pressure mixed pneumatic conveyingmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，it is widely used inpharmaceutical factory,power,building materials,chemical industry,build a ship and other industries，at runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，be loved by our customers.。

Suction pressure mixed pneumatic conveying

2、Suction pressure mixed pneumatic conveying application

Suction pressure mixed pneumatic conveyings have the following purposes.

1. save energy and cut emissions

Although the Suction pressure mixed pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Long distance transportation

The Suction pressure mixed pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Reduce pollution

The Suction pressure mixed pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Dust removal and purification

The Suction pressure mixed pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. Long-distance and multipoint transportation

The Suction pressure mixed pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Suction pressure mixed pneumatic conveyings have important application value in large factories and cross-regional material transportation.

Suction pressure mixed pneumatic conveying

3、Suction pressure mixed pneumatic conveying structure composition

The Suction pressure mixed pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Suction pressure mixed pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Suction pressure mixed pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Suction pressure mixed pneumatic conveying

4、Introduction of Suction pressure mixed pneumatic conveying characteristics

Suction pressure mixed pneumatic conveyingthe main features are versatility, Wide range of conveying materials, Flexible pipeline layout, Convenient maintenance and Can carry out long-distance dispersion transportation.，Commonly used inReduce pollution,material handling,Mixing and classification,Dust removal and essence,Bulk material transportation and so on，is a Suction pressure mixed pneumatic conveying，is a material conveying system that uses the pressure of gas to convey powder materials.，it is an ideal choice for customers to buy Suction pressure mixed pneumatic conveying。

Suction pressure mixed pneumatic conveying

5、Introduction of advantages of Suction pressure mixed pneumatic conveying

The advantages of Suction pressure mixed pneumatic conveying are as follows:

1. Environmental protection and pollution-free

The Suction pressure mixed pneumatic conveying system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

2. Convenient maintenance and easy automation.

The Suction pressure mixed pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

3. Multiple process operations can be carried out at the same time

In the process of conveying, the Suction pressure mixed pneumatic conveying system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

4. Strong adaptability

Suction pressure mixed pneumatic conveyings are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Suction pressure mixed pneumatic conveying system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

5. energy saving and environmental protection

Because the Suction pressure mixed pneumatic conveying is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

Suction pressure mixed pneumatic conveying

Suction pressure mixed pneumatic conveyingis a common Suction pressure mixed pneumatic conveying，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，widely used in metallurgy, grain processing, transportation, heat-engine plant, chemical plant and other fields。