What is a Nano powder conveying equipment? Introduction to the Working Principle of Powder pneumatic conveying

Nano powder conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Remote operation can be carried out from several points to one place or from one place to several points.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Closed pipeline transportation，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，the main structure includes Air source system, control system, Conveying pipeline system, Bunker system and Conveying pipeline system，This Nano powder conveying equipmentThe overall structural design is relatively simple and compact.，usually used in chemical industry, building material, building material, cast, transportation and other fields，the product looks atmospheric.。The following is to introduce the Nano powder conveying equipment:

1、Brief introduction of Nano powder conveying equipment

Nano powder conveying equipmentis a technology that uses the energy of air flow to continuously convey powdery and granular materials.，at work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，widely used in machine building, metallurgy, plastic, pharmaceutical factory, chemical industry and other fields。

Nano powder conveying equipment

2、Nano powder conveying equipment use

The purpose of Nano powder conveying equipment is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Nano powder conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Mixing and classification

In the process of conveying, the Nano powder conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Multi-point transportation

The Nano powder conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Bulk material transportation

The Nano powder conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Nano powder conveying equipment, these materials can be efficiently transferred between different production links or equipment.

5. Long distance transportation

The Nano powder conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Nano powder conveying equipment

3、Nano powder conveying equipment application

Nano powder conveying equipments have the following purposes.

1. Environmental protection and cleaner production

The Nano powder conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

2. cut down on energy consumption

Although the power consumption of the Nano powder conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Dust removal and purification

The Nano powder conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Reduce pollution

The Nano powder conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. material handling

Nano powder conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Nano powder conveying equipment

4、Nano powder conveying equipment advantage

The advantages of Nano powder conveying equipment are as follows:

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Nano powder conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. Material quality protection

In the process of conveying, the Nano powder conveying equipment can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. Various process operations can be realized.

While conveying materials, the Nano powder conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Nano powder conveying equipment more flexible and adaptable in the production process.

4. be of simple construction

Nano powder conveying equipment has simple structure and convenient operation.

5. High degree of automation

The Nano powder conveying equipment system is easy to realize automatic control.

Nano powder conveying equipment

5、Nano powder conveying equipment video live broadcast

The following is the live video of Nano powder conveying equipment designed and produced by hyde powder for users, from which we can see the the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as dust.、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、Can realize the transportation of materials in a closed pipeline.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the process of conveying, various technological operations can be carried out at the same time, such as mix. of hyde powderNano powder conveying equipment.。

Nano powder conveying equipment

As you can see from the live video.，hyde it has the characteristics of High reliability, easy installation, Can carry out long-distance dispersion transportation., energy saving and environmental protection and Can reduce the labor intensity。

Nano powder conveying equipmentthe advantage is Can be charged at one place and then discharged at multiple places.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.，It can be used for Process assistance, material handling, Long-distance and multipoint transportation, Mixing and classification, Environmental protection and cleaner production, Heating, cooling and drying and so on，multifunctional, with functions such as Physical processing assistance, material handling, Closed conveying, Environmental protection and pollution-free and Physical processing assistance。