What is a Polyethylene pneumatic conveying equipment? Introduction to the advantages and characteristics of Powder conveying functions

Polyethylene pneumatic conveying equipmentis a material conveying device that uses the pressure of gas to convey powder materials.。

1、Brief introduction of Polyethylene pneumatic conveying equipment

Polyethylene pneumatic conveying equipmentis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，It has the functions of Long-distance and multipoint transportation, Reduce pollution, Multi-point transportation, Environmental protection and cleaner production and material handling，Materials collected from several points can be sent to one place or one place to scattered points.、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Fully enclosed transportation system, materials are transported in closed pipes.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.，The overall structural design is relatively simple，it is mainly composed of Air source system, dust pelletizing system, Bunker system, delivery system and Conveying pipeline system，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。

Polyethylene pneumatic conveying equipment

2、Video analysis of Polyethylene pneumatic conveying equipment

Speak directly with facts on the spot。

Polyethylene pneumatic conveying equipment

As you can see from the live video.，hyde powder is a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.。

3、Structural characteristics of Polyethylene pneumatic conveying equipment

The Polyethylene pneumatic conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Air source device

The air source device is the power core of the Polyethylene pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polyethylene pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Polyethylene pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Polyethylene pneumatic conveying equipment

4、Functional advantages of Polyethylene pneumatic conveying equipment

Polyethylene pneumatic conveying equipments have the following advantages.

1. Save space

Compared with other transportation modes, the Polyethylene pneumatic conveying equipment system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

2. versatility

In the process of conveying, the Polyethylene pneumatic conveying equipment system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

3. Wide application range

For materials with unstable chemical properties, the Polyethylene pneumatic conveying equipment system can use inert gas for transportation to ensure the stability of the materials during transportation.

4. Multi-point to multi-point transportation

The Polyethylene pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. Environmental protection and pollution-free

Because the Polyethylene pneumatic conveying equipment is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

Polyethylene pneumatic conveying equipment

5、How much is the Polyethylene pneumatic conveying equipment?

The Polyethylene pneumatic conveying equipment price is introduced as follows:

1. Manufacturer's sales model

If there is no middleman to earn the difference, then the Polyethylene pneumatic conveying equipment price will naturally decrease. hyde adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Polyethylene pneumatic conveying equipment have more or less differences in price.

3. Different regions

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

4. market supply and demand

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Polyethylene pneumatic conveying equipment market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

5. Parameter size

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

Polyethylene pneumatic conveying equipment

6、company strength

The company has many years of Polyethylene pneumatic conveying equipment manufacturing experience, large scale and strong strength.。

hyde powder

Polyethylene pneumatic conveying equipmentit is widely used intransportation,medicine,power,build a ship,chemical industry and other industries，Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。