Introduction to Polypropylene pneumatic conveying equipment and Pneumatic conveying equipment structure principle

Polypropylene pneumatic conveying equipmentIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，the main structure includes control system, Bunker system, delivery system, dust pelletizing system, Conveying pipeline system and so on，is a common Polypropylene pneumatic conveying equipment，customizable。The following is to introduce the Polypropylene pneumatic conveying equipment:

1、Brief introduction of Polypropylene pneumatic conveying equipment

Polypropylene pneumatic conveying equipmentis a technology that uses the energy of air flow to continuously convey powdery and granular materials.。

Polypropylene pneumatic conveying equipment

2、Polypropylene pneumatic conveying equipment use

The purpose of Polypropylene pneumatic conveying equipment is introduced as follows:

1. save energy and cut emissions

Although the Polypropylene pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Long distance transportation

The Polypropylene pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Reduce pollution

The Polypropylene pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Multi-point transportation

The Polypropylene pneumatic conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Process assistance

In some production processes, Polypropylene pneumatic conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Polypropylene pneumatic conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Polypropylene pneumatic conveying equipment

3、Polypropylene pneumatic conveying equipment structure

The Polypropylene pneumatic conveying equipment structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Air source device

The air source device is the power core of the Polypropylene pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polypropylene pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Polypropylene pneumatic conveying equipment

4、Polypropylene pneumatic conveying equipment HD real shot

The omni-directional high-definition real shot of the Polypropylene pneumatic conveying equipment is shown as follows to meet the purchase needs of our customers.。

Polypropylene pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Polypropylene pneumatic conveying equipment advantage

The advantages of Polypropylene pneumatic conveying equipment are as follows:

1. Structural construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. Small floor space

Compared with the traditional mechanical conveying mode, the Polypropylene pneumatic conveying equipment system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

3. Improve conveying efficiency

Can transport materials quickly and in large quantities.

4. Low maintenance cost

Although the initial investment of Polypropylene pneumatic conveying equipment system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

5. Save space

Compared with the traditional mechanical conveying mode, the Polypropylene pneumatic conveying equipment system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

Polypropylene pneumatic conveying equipment

6、How much is the Polypropylene pneumatic conveying equipment?

The Polypropylene pneumatic conveying equipment price is introduced as follows:

1. Sales model

hyde Polypropylene pneumatic conveying equipment manufacturer is a large Production and processing center in jinan, Shandong province, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Polypropylene pneumatic conveying equipment price is also low.

2. Cost input

Cost is a direct and fundamental factor that affects the price of Polypropylene pneumatic conveying equipment. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Polypropylene pneumatic conveying equipment price, low in cost and low in price.

3. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Polypropylene pneumatic conveying equipment price and service can meet the actual needs of customers.

5. product model

The quotation of the same series of Polypropylene pneumatic conveying equipment with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

Polypropylene pneumatic conveying equipment

Polypropylene pneumatic conveying equipmentit has the functions of Physical processing assistance, Closed conveying, Explosion-proof involves, Automatic control and material handling，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，widely used inchemical industry,heat-engine plant,build a ship,logistics,plastic and other industries。