Introduction to Nitrile rubber conveying system, advantages, characteristics and principles of Powder conveying

Nitrile rubber conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，be loved by our customers.。

1、Brief introduction of Nitrile rubber conveying system

Nitrile rubber conveying systemmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，at the start of the operation,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，convenient to use,High conveying efficiency,Easy to use,Convenient for material transportation and recovery.,Convenient maintenance，customizable。

Nitrile rubber conveying system

2、Nitrile rubber conveying system principle

Nitrile rubber conveying systemat runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，features include Wide range of conveying materials, Easy maintenance, Good dustproof effect, energy saving and environmental protection and The failure rate is low，is developed and improved by hyde powder。

Nitrile rubber conveying system

3、Nitrile rubber conveying system use

The purpose of Nitrile rubber conveying system is introduced as follows:

1. Environmental protection and cleaner production

The Nitrile rubber conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

2. save energy and cut emissions

Although the Nitrile rubber conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Long distance transportation

The Nitrile rubber conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Multi-point transportation

The Nitrile rubber conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Process assistance

In some production processes, Nitrile rubber conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Nitrile rubber conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Nitrile rubber conveying system

4、Introduction of Nitrile rubber conveying system characteristics

Nitrile rubber conveying systemit has the characteristics of The conveying speed is faster, Easy to realize automation, No secondary pollution, Convenient operation and management and Flexible transmission line，Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。

Nitrile rubber conveying system

5、Nitrile rubber conveying system structure

The Nitrile rubber conveying system structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Nitrile rubber conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Nitrile rubber conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Nitrile rubber conveying system

6、hyde company discount

Nitrile rubber conveying system is a new type of Powder conveying introduced by hyde manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for power and other industries. Now consult Nitrile rubber conveying system, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde powder

Nitrile rubber conveying systemit has the functions of Physical processing assistance, Automatic control, Closed conveying, material handling and Explosion-proof involves，it is widely used in building material, medicine, chemical industry, build a ship, environmental protection and other industries。