Introduction to Zircon sand pneumatic conveying system and Pneumatic conveying equipment working principle

Zircon sand pneumatic conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。

1、Brief introduction of Zircon sand pneumatic conveying system

Zircon sand pneumatic conveying systemby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，the product looks atmospheric.，Widely used in Multi-point transportation, Reduce pollution, Mixing and classification, material handling and Heating, cooling and drying，it has the characteristics of Easy to realize automation, Can carry out long-distance dispersion transportation., Stable operation, Good dustproof effect and Easy to use，is designed by hyde powder with advanced technology。

Zircon sand pneumatic conveying system

2、Introduction of advantages of Zircon sand pneumatic conveying system

The advantages of Zircon sand pneumatic conveying system are as follows:

1. Convenient maintenance and easy automation.

The Zircon sand pneumatic conveying system device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

2. energy saving and environmental protection

The whole process of the Zircon sand pneumatic conveying system system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

3. Save space

Zircon sand pneumatic conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. High degree of automation

Modern Zircon sand pneumatic conveying system systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

5. Multi-point to multi-point transportation

The Zircon sand pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Zircon sand pneumatic conveying system

3、Zircon sand pneumatic conveying system function

Zircon sand pneumatic conveying systemit has the functions of Environmental protection and pollution-free, Physical processing assistance, Explosion-proof involves, Closed conveying and Physical processing assistance，the product looks beautiful.，the main features are High system reliability, automation, Strong adaptability, Safe and reliable and Centralized transportation，is a kind of high quality and low price Zircon sand pneumatic conveying system，The price is relatively low.。

Zircon sand pneumatic conveying system

4、Zircon sand pneumatic conveying system use

The purpose of Zircon sand pneumatic conveying system is introduced as follows:

1. Long distance transportation

The Zircon sand pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. cut down on energy consumption

Although the power consumption of the Zircon sand pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Mixing and classification

In the process of conveying, the Zircon sand pneumatic conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Zircon sand pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Reduce pollution

The Zircon sand pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Zircon sand pneumatic conveying system

5、Structural advantages of Zircon sand pneumatic conveying system

The Zircon sand pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Zircon sand pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Zircon sand pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Zircon sand pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Zircon sand pneumatic conveying system

6、Zircon sand pneumatic conveying system price concessions

The Zircon sand pneumatic conveying system price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. market demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Zircon sand pneumatic conveying system price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

3. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. manufacturing cost

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. hyde has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Zircon sand pneumatic conveying system have more or less differences in price.

Zircon sand pneumatic conveying system

Zircon sand pneumatic conveying systemit is widely used in chemical industry, environmental protection, building material, grain processing and plastic，the principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.。