What is a Bentonite pneumatic conveying system? Introduction to the Working Principle of Powder conveying

Bentonite pneumatic conveying systemmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，multifunctional, with functions such as Closed conveying, Physical processing assistance, Automatic control, Environmental protection and pollution-free and material handling，Widely used incut down on energy consumption,material handling,Long distance transportation,Heating, cooling and drying,Long-distance and multipoint transportation and so on，the advantage is It is easy to realize the transportation engineering goal of multi-point feeding and multi-point unloading.、The whole conveying process is sealed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Can realize the transportation of materials in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，it is an ideal choice for customers to buy Bentonite pneumatic conveying system。

1、Brief introduction of Bentonite pneumatic conveying system

Bentonite pneumatic conveying systemis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，The structural design is simple, novel and special.，the main structure includes control system, Bunker system, Conveying pipeline system, Air source system, dust pelletizing system and so on，was developed and designed by hyde。

Bentonite pneumatic conveying system

2、Bentonite pneumatic conveying system performance advantage

Bentonite pneumatic conveying systems have the following advantages.

1. Strong adaptability

The Bentonite pneumatic conveying system system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

2. High degree of automation

Modern Bentonite pneumatic conveying system systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

3. Save space

Bentonite pneumatic conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. High conveying efficiency and low cost.

The Bentonite pneumatic conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The Bentonite pneumatic conveying system is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

Bentonite pneumatic conveying system

3、Bentonite pneumatic conveying system application

Bentonite pneumatic conveying systems have the following purposes.

1. Reduce pollution

The Bentonite pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Dust removal and purification

The Bentonite pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. save energy and cut emissions

Although the Bentonite pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Bentonite pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Mixing and classification

In the process of conveying, the Bentonite pneumatic conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Bentonite pneumatic conveying system

4、Advantages of Bentonite pneumatic conveying system principle

Bentonite pneumatic conveying systemin the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，is an efficient and environment-friendly way to transport materials by using the energy of airflow.，It has the functions of Dust removal and essence, Reduce pollution, Environmental protection and cleaner production, Process assistance and Bulk material transportation，has been favored by more and more customers.。

Bentonite pneumatic conveying system

5、Video analysis of Bentonite pneumatic conveying system

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Bentonite pneumatic conveying system production process and production site, and gain favorable comments and recognition from customers.。

Bentonite pneumatic conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it has the functions of Explosion-proof involves, Closed conveying, Automatic control, Explosion-proof involves and Environmental protection and pollution-free。

Bentonite pneumatic conveying systemfeatures include No secondary pollution, Convenient maintenance, Convenient maintenance, automation and High reliability，is a popular Bentonite pneumatic conveying system。