What is a Quantitative weighing feeding and conveying? Introduction to the advantages and characteristics of the Pneumatic conveying equipment

Quantitative weighing feeding and conveyingis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，is a common Quantitative weighing feeding and conveying，is based on hyde is carefully developed by hyde powder combined with advanced technology。

1、Brief introduction of Quantitative weighing feeding and conveying

Quantitative weighing feeding and conveyingis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，at runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，the product looks atmospheric.。

Quantitative weighing feeding and conveying

2、Functional advantages of Quantitative weighing feeding and conveying

The advantages of Quantitative weighing feeding and conveying are as follows:

1. Low maintenance cost

The Quantitative weighing feeding and conveying system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

2. Environmental protection and pollution-free

The Quantitative weighing feeding and conveying system is completely closed, which reduces the flying of dust and meets the requirements of environmental protection. This is especially important for those industries that require high environmental protection.

3. Wide application range

The Quantitative weighing feeding and conveying system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

4. Multi-point to multi-point transportation

The Quantitative weighing feeding and conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. Save space

Compared with other transportation modes, the Quantitative weighing feeding and conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

Quantitative weighing feeding and conveying

3、Quantitative weighing feeding and conveying HD real shot

You can buy Quantitative weighing feeding and conveying according to your needs and show you product videos.。

Quantitative weighing feeding and conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. It is a product series that integrates Reduce pollution, Dust removal and essence, Multi-point transportation, cut down on energy consumption and Mixing and classification。

4、Quantitative weighing feeding and conveying application

Quantitative weighing feeding and conveyings have the following purposes.

1. Reduce pollution

The Quantitative weighing feeding and conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. material handling

Quantitative weighing feeding and conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. cut down on energy consumption

Although the power consumption of the Quantitative weighing feeding and conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Dust removal and purification

The Quantitative weighing feeding and conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. Mixing and classification

In the process of conveying, the Quantitative weighing feeding and conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Quantitative weighing feeding and conveying

5、Quantitative weighing feeding and conveying function

Quantitative weighing feeding and conveyingit has the functions of Closed conveying, Automatic control, Environmental protection and pollution-free, material handling and Explosion-proof involves，generally, it is composed of delivery system, dust pelletizing system, Air source system, delivery system, control system and other major components，it has the characteristics of High conveying efficiency, Strong adaptability, versatility, Flexible transmission line and Good dustproof effect，widely used in chemical plant, machine building, transportation, building materials, metallurgy and other fields，customizable。

Quantitative weighing feeding and conveying

Quantitative weighing feeding and conveyingthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the product looks atmospheric.。