Introduction to Powder conveying pump, bin pump specifications, model parameters

Powder conveying pumpalso known as sending tank, pneumatic conveying pump or bin pump, it is a pressure vessel that uses compressed air (or other inert gas) as power source.，it is widely used in Metallurgical industry, Cement industry, electricity industry, Cement industry and chemical lines，at the start of the operation,When the material enters the pump body and is full, it is gasified to make the material form a fluidized state and smoothly enter the mixing chamber. At the same time, the compressed air is ejected at high speed through the jet nozzle and fully mixed with the fluid material. The high-speed airflow drives the material to pass through a specific pipeline, which converts the kinetic energy of compressed air into pressure energy, and at the same time, the air and the material are mixed again, so as to improve the speed of the material and make it move forward along the conveying pipeline, thus achieving the purpose of conveying powdery materials.，Widely used inparticle transport,material handling,environmental protection and dust removal,pneumatic transport,pneumatic ash conveying and so on，reliable quality。The following is to introduce the Powder conveying pump:

1、Brief introduction of Powder conveying pump

Powder conveying pumpis a professional equipment adopting positive pressure pneumatic conveying mode.，it has the functions of particle transport, material handling, pneumatic ash conveying, particle transport and powder conveying，is a Powder conveying pump newly developed by hyde powder。

Powder conveying pump

2、Powder conveying pump function

Powder conveying pumpmultifunctional, with functions such as pneumatic transport, environmental protection and dust removal, material handling, pneumatic ash conveying and environmental protection and dust removal，at runtime,It is a part of positive pressure pneumatic ash removal system to transport loose materials such as powder and granule through pipelines in a long distance and with high efficiency.，also known as sending tank, pneumatic conveying pump or bin pump, it is a pressure vessel that uses compressed air (or other inert gas) as power source.。

Powder conveying pump

3、Powder conveying pump principle

The principle of Powder conveying pump is introduced as follows:

1. Feeding stage

The feed valve of the Powder conveying pump is opened, and the material enters the pump body of the Powder conveying pump under the action of gravity or other feeding devices. In this process, the pressure inside the pump body is basically the same as the external atmospheric pressure to ensure the smooth entry of materials.

2. Feeding stage

The feed valve of the Powder conveying pump is opened, and the material enters the pump body of the Powder conveying pump under the action of gravity or other feeding devices. In this process, the pressure inside the pump body is basically the same as the external atmospheric pressure to ensure the smooth entry of materials.

3. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

4. Discharge stage

After the material is transported to the destination, it is discharged through the discharge valve. The destination can be a silo, a reaction kettle and other equipment for receiving materials. After discharging, the whole Powder conveying pump system can enter the next feeding-conveying-discharging cycle.

5. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

Powder conveying pump

4、Powder conveying pump function

Powder conveying pumpit has the functions of powder conveying, pneumatic transport, particle transport, material handling and pneumatic ash conveying。

Powder conveying pump

5、Introduction of advantages of Powder conveying pump

Powder conveying pumps have the following advantages.

1. Strong adaptability

Suitable for a variety of material types, such as powder, granular and other loose materials. The transportation distance is long, which can meet the transportation needs of different distances and different terrains. Powder conveying pumps of different models and specifications can be customized according to specific needs to adapt to different application scenarios.

2. Environmental protection and energy saving

Adopt fully sealed and pollution-free transportation mode, which meets the requirements of environmental protection. During transportation, materials will not leak, thus avoiding environmental pollution and material waste. Compared with other transportation modes, the energy consumption of the Powder conveying pump is relatively low, which is helpful for energy saving and emission reduction.

3. Good flexibility

It can be combined with other conveying equipment (such as pipelines, valves, etc.) to form a complete conveying system. The conveying mode is flexible and diverse, and it can be unloaded at a single point or at multiple points to meet different conveying requirements.

4. High reliability

Made of high-quality materials and advanced technology, it has high reliability and durability. In the harsh working environment, it can still maintain good working performance and ensure the continuity and stability of material transportation.

5. Efficient transportation

Can use compressed air and other power sources to transport loose materials such as powder and granule at a long distance and with high efficiency. The conveying capacity is large, which can meet the requirements of large conveying capacity and improve production efficiency.

Powder conveying pump

6、How much is the Powder conveying pump?

The Powder conveying pump price is introduced as follows:

1. Cost input

When the Powder conveying pump is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. quality

hyde attaches great importance to the quality of products, which can be reflected in the manufacturing process of Powder conveying pump and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

3. Configuration level

Products of the same style, different configurations, the product price is definitely different, therefore, the Powder conveying pump price is affected by the configuration, and the price varies.

4. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. product model

The quotation of the same series of Powder conveying pump with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

Powder conveying pump

Powder conveying pumpIt is a product series that integrates particle transport, powder conveying, material handling, environmental protection and dust removal and pneumatic transport，is a Powder conveying pump，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes air evacuation valve, control system, bleeder valve, pump body, control system and so on。