Introduction to Quantitative feeding and conveying and Powder pneumatic conveying structure principle

Quantitative feeding and conveyingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，it can be used in build a ship, building material, chemical industry, logistics, medicine and other industries，Widely used inReduce pollution,Process assistance,Long distance transportation,cut down on energy consumption,Multi-point transportation and so on。

1、Brief introduction of Quantitative feeding and conveying

Quantitative feeding and conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，super quality and competitive price。

Quantitative feeding and conveying

2、Quantitative feeding and conveying explanation video

On-site aerial photography of Quantitative feeding and conveying。

Quantitative feeding and conveying

As you can see from the live video.，hyde Commonly used inDust removal and essence,Bulk material transportation,Dust removal and essence,Mixing and classification,Reduce pollution and so on。

3、Functional advantages of Quantitative feeding and conveying

Quantitative feeding and conveyings have the following advantages.

1. High conveying efficiency

Can transport materials quickly and in large quantities.

2. High degree of automation

The Quantitative feeding and conveying system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

3. Material quality protection

In the process of conveying, the Quantitative feeding and conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

4. High conveying efficiency and low cost.

The Quantitative feeding and conveying system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Quantitative feeding and conveyings can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

5. Small floor space

Compared with other transportation modes, the Quantitative feeding and conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

Quantitative feeding and conveying

4、Quantitative feeding and conveying HD real shot

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Quantitative feeding and conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Structural characteristics of Quantitative feeding and conveying

The Quantitative feeding and conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Quantitative feeding and conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Quantitative feeding and conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Quantitative feeding and conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Quantitative feeding and conveying

Quantitative feeding and conveyingit is widely used in chemical plant, plastic, grain processing, heat-engine plant and building materials，Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。