Introduction to Upward blowing silo pneumatic conveying pump, bin pump advantages, characteristics and principles

Upward blowing silo pneumatic conveying pumpis a kind of equipment used for pneumatic conveying, which is mainly used to convey powdery or granular materials to designated places through airflow.，multifunctional, with functions such as pneumatic ash conveying, material handling, powder conveying, particle transport and material handling，Simple structure and reliable operation.，it is mainly composed of air evacuation valve, control system, pump body, fluidizer and intake valve，is a Upward blowing silo pneumatic conveying pump，was developed and designed by hyde。The following is to introduce the Upward blowing silo pneumatic conveying pump:

1、Brief introduction of Upward blowing silo pneumatic conveying pump

Upward blowing silo pneumatic conveying pumpis a professional equipment adopting positive pressure pneumatic conveying mode.，Cheap and high quality。

Upward blowing silo pneumatic conveying pump

2、Upward blowing silo pneumatic conveying pump field real shot

The finished products of the Upward blowing silo pneumatic conveying pump factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Upward blowing silo pneumatic conveying pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Functional advantages of Upward blowing silo pneumatic conveying pump

Upward blowing silo pneumatic conveying pumps have the following advantages.

1. Environmental protection and energy saving

Adopt fully sealed and pollution-free transportation mode, which meets the requirements of environmental protection. During transportation, materials will not leak, thus avoiding environmental pollution and material waste. Compared with other transportation modes, the energy consumption of the Upward blowing silo pneumatic conveying pump is relatively low, which is helpful for energy saving and emission reduction.

2. Strong adaptability

Suitable for a variety of material types, such as powder, granular and other loose materials. The transportation distance is long, which can meet the transportation needs of different distances and different terrains. Upward blowing silo pneumatic conveying pumps of different models and specifications can be customized according to specific needs to adapt to different application scenarios.

3. Good flexibility

It can be combined with other conveying equipment (such as pipelines, valves, etc.) to form a complete conveying system. The conveying mode is flexible and diverse, and it can be unloaded at a single point or at multiple points to meet different conveying requirements.

4. High reliability

Made of high-quality materials and advanced technology, it has high reliability and durability. In the harsh working environment, it can still maintain good working performance and ensure the continuity and stability of material transportation.

5. Simple operation

The operation is simple and convenient, and usually adopts automatic control mode, which is suitable for the actual needs of engineering. Automatic control can be realized by programming, which reduces manual operation and labor intensity.

Upward blowing silo pneumatic conveying pump

4、Advantages of Upward blowing silo pneumatic conveying pump principle

The Upward blowing silo pneumatic conveying pump has the following principles.

1. Discharge stage

After the material is transported to the destination, it is discharged through the discharge valve. The destination can be a silo, a reaction kettle and other equipment for receiving materials. After discharging, the whole Upward blowing silo pneumatic conveying pump system can enter the next feeding-conveying-discharging cycle.

2. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

3. Feeding stage

The feed valve of the Upward blowing silo pneumatic conveying pump is opened, and the material enters the pump body of the Upward blowing silo pneumatic conveying pump under the action of gravity or other feeding devices. In this process, the pressure inside the pump body is basically the same as the external atmospheric pressure to ensure the smooth entry of materials.

4. Discharge stage

After the material is transported to the destination, it is discharged through the discharge valve. The destination can be a silo, a reaction kettle and other equipment for receiving materials. After discharging, the whole Upward blowing silo pneumatic conveying pump system can enter the next feeding-conveying-discharging cycle.

5. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

Upward blowing silo pneumatic conveying pump

5、Upward blowing silo pneumatic conveying pump video

Speak directly with facts on the spot。

Upward blowing silo pneumatic conveying pump

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a kind of equipment used for pneumatic conveying.。

6、Introduction of advantages of Upward blowing silo pneumatic conveying pump

Upward blowing silo pneumatic conveying pumps have the following advantages.

1. Good flexibility

It can be combined with other conveying equipment (such as pipelines, valves, etc.) to form a complete conveying system. The conveying mode is flexible and diverse, and it can be unloaded at a single point or at multiple points to meet different conveying requirements.

2. Environmental protection and energy saving

Adopt fully sealed and pollution-free transportation mode, which meets the requirements of environmental protection. During transportation, materials will not leak, thus avoiding environmental pollution and material waste. Compared with other transportation modes, the energy consumption of the Upward blowing silo pneumatic conveying pump is relatively low, which is helpful for energy saving and emission reduction.

3. Strong adaptability

Suitable for a variety of material types, such as powder, granular and other loose materials. The transportation distance is long, which can meet the transportation needs of different distances and different terrains. Upward blowing silo pneumatic conveying pumps of different models and specifications can be customized according to specific needs to adapt to different application scenarios.

4. Simple operation

The operation is simple and convenient, and usually adopts automatic control mode, which is suitable for the actual needs of engineering. Automatic control can be realized by programming, which reduces manual operation and labor intensity.

5. High reliability

Made of high-quality materials and advanced technology, it has high reliability and durability. In the harsh working environment, it can still maintain good working performance and ensure the continuity and stability of material transportation.

Upward blowing silo pneumatic conveying pump

Upward blowing silo pneumatic conveying pumpalso known as sending tank, pneumatic conveying pump or bin pump.，it has the characteristics of efficient transportation, flexible layout, large conveying capacity, efficient transportation and automation，it is widely used in electricity industry, Building materials industry, Metallurgical industry, chemical lines and chemical lines。