Introduction to Low noise water-cooled Roots blower, how much is the price of the blower?

Low noise water-cooled Roots bloweris a positive displacement blower.。The following is to introduce the Low noise water-cooled Roots blower:

1、Brief introduction of Low noise water-cooled Roots blower

Low noise water-cooled Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，it is mainly composed of muffler, impeller, case, rotator and fuel tank，Commonly used insewage disposal,supply air,Ventilation,cool,mix and so on，the product looks beautiful.，it is an ideal choice for customers to buy Low noise water-cooled Roots blower。

Low noise water-cooled Roots blower

2、Low noise water-cooled Roots blower principle

Low noise water-cooled Roots blowerat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，is a common Low noise water-cooled Roots blower。

Low noise water-cooled Roots blower

3、Low noise water-cooled Roots blower advantage

The advantages of Low noise water-cooled Roots blower are as follows:

1. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

2. Simple structure and convenient manufacture

The Low noise water-cooled Roots blower is simple in design and easy to manufacture and maintain.

3. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

4. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

5. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

Low noise water-cooled Roots blower

4、Low noise water-cooled Roots blower function

Low noise water-cooled Roots blowerit has the functions of exhaust emission, pressurized transportation, supply air, pick up the suction and mix，The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，is a Low noise water-cooled Roots blower newly developed by hyde powder。

Low noise water-cooled Roots blower

5、Low noise water-cooled Roots blower characteristics

Low noise water-cooled Roots blowerthe main features are wide application range, stable and reliable, smooth operation, Precise control and convenient manufacture，it is widely used in petrochemical industry, manufacturing industry, Environmental protection industry, Pharmaceutical and chemical industries, pottery and porcelain and other industries，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Because of the design of three-blade rotor, the Low noise water-cooled Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Low noise water-cooled Roots blower less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Low noise water-cooled Roots blower perform well in many situations where stable airflow is needed.，support customization。

Low noise water-cooled Roots blower

6、Working principle of Low noise water-cooled Roots blower

Low noise water-cooled Roots blowerat the start of the operation,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，It can be used for pick up the suction, sewage disposal, Pressurized transportation, Desulfurization oxidation, Ventilation, supply air and so on，multifunctional, with functions such as dehydrate, material handling, cool, material fluidization and aeration，can be customized according to user's needs.。

Low noise water-cooled Roots blower

Low noise water-cooled Roots bloweris a popular Low noise water-cooled Roots blower，It has the functions of dry, dehydrate, aeration, material handling and Material fluidization，the advantage is Because of the design of three-blade rotor, the Low noise water-cooled Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the Low noise water-cooled Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Low noise water-cooled Roots blower perform well in many situations where stable airflow is needed.、In the process of air intake and exhaust, the Low noise water-cooled Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。