Introduction to High pressure tri blade Roots blower, advantages, characteristics and principles of blower

High pressure tri blade Roots bloweris a positive displacement blower.，the product looks atmospheric.，it is widely used in chemical fertilizer, coal chemical industry, Environmental protection industry, power, Pharmaceutical and chemical industries and other industries。

1、Brief introduction of High pressure tri blade Roots blower

High pressure tri blade Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，customizable。

High pressure tri blade Roots blower

2、On-site real shot of High pressure tri blade Roots blower

High pressure tri blade Roots blower HD real shot, a variety of specifications and models display, for our customers to choose at will.。

High pressure tri blade Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Working principle of High pressure tri blade Roots blower

High pressure tri blade Roots blowerin the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，structure mainly includes: fuel tank, impeller, wallboard, bearing, muffler and so on。

High pressure tri blade Roots blower

4、Structural characteristics of High pressure tri blade Roots blower

The High pressure tri blade Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the High pressure tri blade Roots blower enters and exits.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High pressure tri blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

High pressure tri blade Roots blower

5、Introduction of High pressure tri blade Roots blower characteristics

High pressure tri blade Roots blowerit has the characteristics of Precise control, stable and reliable, smooth operation, run smoothly and wide application range，it has the functions of pressurized transportation, mix, dry, supply air and aquaculture，is an advanced High pressure tri blade Roots blower developed by our company in combination with the actual situation of the industry。

High pressure tri blade Roots blower

High pressure tri blade Roots blowerit is mainly composed of impeller, bearing, fuel tank, muffler and case，strong adaptability,convenient manufacture,low noise,convenient maintenance,Precise control。