Introduction to Ton bag broken bag conveying, pneumatic conveying system specifications, model parameters

Ton bag broken bag conveyingis a method of conveying materials through pipelines by using air flow with a certain speed.，it has the functions of Closed conveying, Physical processing assistance, Environmental protection and pollution-free, Automatic control and material handling，the main structure includes Air source system, control system, delivery system, Conveying pipeline system, dust pelletizing system and so on，the main features are Centralized transportation, Flexible pipeline layout, Reduce material loss, energy saving and environmental protection and automation，reliable quality，low in price。The following is to introduce the Ton bag broken bag conveying:

1、Brief introduction of Ton bag broken bag conveying

Ton bag broken bag conveyingis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the main structure includes Bunker system, Air source system, control system, Conveying pipeline system and delivery system，This Ton bag broken bag conveyingThe overall structural design is relatively simple and compact.，support customization。

Ton bag broken bag conveying

2、Ton bag broken bag conveying use

The purpose of Ton bag broken bag conveying is introduced as follows:

1. cut down on energy consumption

Although the power consumption of the Ton bag broken bag conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. save energy and cut emissions

Although the Ton bag broken bag conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. material handling

Ton bag broken bag conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Process assistance

In some production processes, Ton bag broken bag conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Ton bag broken bag conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Adapt to complex environment

The Ton bag broken bag conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Ton bag broken bag conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Ton bag broken bag conveying

3、Ton bag broken bag conveying structure composition

The Ton bag broken bag conveying has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ton bag broken bag conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Ton bag broken bag conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Ton bag broken bag conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Ton bag broken bag conveying

4、Ton bag broken bag conveying introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Ton bag broken bag conveying production process and production site, and gain favorable comments and recognition from customers.。

Ton bag broken bag conveying

As you can see from the live video.，hyde powder multifunctional, with functions such as Explosion-proof involves, Automatic control, Physical processing assistance, Environmental protection and pollution-free and Closed conveying。

5、Ton bag broken bag conveying application

Ton bag broken bag conveyings have the following purposes.

1. cut down on energy consumption

Although the power consumption of the Ton bag broken bag conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. save energy and cut emissions

Although the Ton bag broken bag conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Environmental protection and cleaner production

The Ton bag broken bag conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. Reduce pollution

The Ton bag broken bag conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Long distance transportation

The Ton bag broken bag conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Ton bag broken bag conveying

6、Ton bag broken bag conveying picture

High-definition picture display of Ton bag broken bag conveying, excellent material selection, reliable quality and trustworthy.。

Ton bag broken bag conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

Ton bag broken bag conveyingit is mainly composed of dust pelletizing system, Bunker system, Air source system, control system and Bunker system，at the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，Multi-point feeding and multi-point discharging are possible.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Fully enclosed transportation system, materials are transported in closed pipes.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、Materials collected from several points can be sent to one place or one place to scattered points.。