Introduction to Anti corrosion Roots blower, Three leaf Roots blower specifications, model parameters

Anti corrosion Roots bloweris a positive displacement blower.，is a Anti corrosion Roots blower，Cheap and high quality。

1、Brief introduction of Anti corrosion Roots blower

Anti corrosion Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it is an ideal choice for customers to buy Anti corrosion Roots blower。

Anti corrosion Roots blower

2、Anti corrosion Roots blower field real shot

The following is the live video of Anti corrosion Roots blower designed and produced by hyde powder for users, from which we can see the The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Anti corrosion Roots blower less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Anti corrosion Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Anti corrosion Roots blower less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption. of hydeAnti corrosion Roots blower.。

Anti corrosion Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it is usually composed of fuel tank, bearing, impeller, rotator and wallboard，Anti corrosion Roots blowerThe overall structural design is relatively simple and compact.。

3、Working principle of Anti corrosion Roots blower

Anti corrosion Roots blowerat work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，Widely used in dry, Material fluidization, material handling, dry and Desulfurization oxidation，it has the functions of pick up the suction, supply air, desulfurization oxidation, dehydrate and dry，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the Anti corrosion Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Anti corrosion Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Anti corrosion Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，is a common Anti corrosion Roots blower。

Anti corrosion Roots blower

4、Anti corrosion Roots blower structure

The Anti corrosion Roots blower structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Anti corrosion Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. impeller

It is the rotating part of the Anti corrosion Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Anti corrosion Roots blower has gradually replaced the two-leaf Anti corrosion Roots blower.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Anti corrosion Roots blower

5、Anti corrosion Roots blower function

Anti corrosion Roots blowermultifunctional, with functions such as aeration, aquaculture, ventilation, pressurized transportation and cool，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，the product looks atmospheric.，The structural design is simple, novel and special.，the main structure includes bearing, fuel tank, wallboard, rotator, impeller and so on，was developed and designed by hyde powder。

Anti corrosion Roots blower

6、Functional advantages of Anti corrosion Roots blower

The advantages of Anti corrosion Roots blower are as follows:

1. Smooth operation

Due to the design of three-blade rotor, the Anti corrosion Roots blower has little vibration and low noise during operation, and the operation is stable and reliable.

2. Compact structure and small floor space.

The Anti corrosion Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

3. Low noise and vibration

The three-leaf rotor structure of the Anti corrosion Roots blower makes it less vibration and noise. This feature makes the Anti corrosion Roots blower work normally in situations where a quiet environment is needed.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Convenient maintenance

The structure of the Anti corrosion Roots blower is relatively simple and easy to maintain.

Anti corrosion Roots blower

Anti corrosion Roots blowerCommonly used inpick up the suction,cool,Desulfurization oxidation,aeration,Ventilation and so on，the product looks beautiful.。