Shandong Haide powder156 6277 7102

Introduction to Water vapor pressurized Roots blower and Three leaf Roots blower structure principle

2025-5-26

Water vapor pressurized Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.,the main features are durable performance, economical and durable, Precise control, energy-efficient and convenient maintenance,It has the functions of Ventilation, Desulfurization oxidation, material handling, aeration and Pressurized transportation,the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Water vapor pressurized Roots blower less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Water vapor pressurized Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Water vapor pressurized Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.,is a common Water vapor pressurized Roots blower。

1、Brief introduction of Water vapor pressurized Roots blower

Water vapor pressurized Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.,the main structure includes muffler, wallboard, fuel tank, impeller and rotator,productThe overall structural design is relatively simple and compact.。

Water vapor pressurized Roots blower

Water vapor pressurized Roots blower

2、Water vapor pressurized Roots blower application

Water vapor pressurized Roots blowerIt is mostly used in pick up the suction, exhaust emission, Desulfurization oxidation, pick up the suction, Material fluidization, cool and so on,it has the functions of dry, aquaculture, sewage disposal, cool and pick up the suction。

Water vapor pressurized Roots blower

Water vapor pressurized Roots blower

3、Water vapor pressurized Roots blower field real shot

Water vapor pressurized Roots blower manufacturer, the product High definition shooting. In order to facilitate new and old customers to find satisfactory the product looks beautiful. more quickly, the following high-definition pictures are provided for reference.。

Water vapor pressurized Roots blower

Water vapor pressurized Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Structural characteristics of Water vapor pressurized Roots blower

The Water vapor pressurized Roots blower has the following structure

  1. wallboard
  2. It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

  3. bearing
  4. It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

  5. impeller
  6. It is the rotating part of the Water vapor pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Water vapor pressurized Roots blower has gradually replaced the two-leaf Water vapor pressurized Roots blower.

  7. fuel tank
  8. Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

  9. rotator
  10. The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Water vapor pressurized Roots blower

Water vapor pressurized Roots blower

5、Water vapor pressurized Roots blower use

Water vapor pressurized Roots blowerMainly used foraquaculture,aeration,Ventilation,sewage disposal anddehydrate,the product looks atmospheric.,support customization。

Water vapor pressurized Roots blower

Water vapor pressurized Roots blower

Water vapor pressurized Roots blowerat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.,widely used inpottery and porcelain,smelt,Flue gas treatment,aquaculture,Textile light textile and other industries。