What is a Pyrolysis gas pressurized three blade Roots blower? Introduction to the advantages and characteristics of the blower

Pyrolysis gas pressurized three blade Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，it has the functions of aeration, dry, mix, ventilation and material fluidization，Commonly used indry,Pressurized transportation,cool,aeration,exhaust emission and so on，features include strong adaptability, convenient maintenance, smooth operation, be of simple construction and run smoothly，Because of the design of three-blade rotor, the Pyrolysis gas pressurized three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Pyrolysis gas pressurized three blade Roots blower perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Pyrolysis gas pressurized three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

1、Brief introduction of Pyrolysis gas pressurized three blade Roots blower

Pyrolysis gas pressurized three blade Roots blowerthe models are complete and can meet the needs of different users for different purposes.，It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is a kind of Pyrolysis gas pressurized three blade Roots blower manufactured by hyde。

Pyrolysis gas pressurized three blade Roots blower

2、On-site real shot of Pyrolysis gas pressurized three blade Roots blower

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Pyrolysis gas pressurized three blade Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Pyrolysis gas pressurized three blade Roots blower explanation video

Speak directly with facts on the spot。

Pyrolysis gas pressurized three blade Roots blower

As you can see from the live video.，hyde widely used insewage disposal,make paper,petrochemical industry,aquaculture,Textile light textile and other industries。

4、Pyrolysis gas pressurized three blade Roots blower structure

The Pyrolysis gas pressurized three blade Roots blower structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Pyrolysis gas pressurized three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. impeller

It is the rotating part of the Pyrolysis gas pressurized three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Pyrolysis gas pressurized three blade Roots blower has gradually replaced the two-leaf Pyrolysis gas pressurized three blade Roots blower.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Pyrolysis gas pressurized three blade Roots blower enters and exits.

Pyrolysis gas pressurized three blade Roots blower

5、Pyrolysis gas pressurized three blade Roots blower characteristics

Pyrolysis gas pressurized three blade Roots blowerPrecise control,economical and durable,stable and reliable,durable performance,convenient manufacture，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Pyrolysis gas pressurized three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Pyrolysis gas pressurized three blade Roots blower perform well in many situations where stable airflow is needed.，it is usually composed of rotator, wallboard, bearing, impeller and rotator，Pyrolysis gas pressurized three blade Roots blowerThe structural design is more advanced and reasonable.。

Pyrolysis gas pressurized three blade Roots blower

6、Brief introduction of Pyrolysis gas pressurized three blade Roots blower

Pyrolysis gas pressurized three blade Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，at work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。

Pyrolysis gas pressurized three blade Roots blower

Pyrolysis gas pressurized three blade Roots blowermultifunctional, with functions such as aeration, material fluidization, supply air, dry and mix，is a popular Pyrolysis gas pressurized three blade Roots blower。