Introduction to Three leaf Roots blower for transporting pyrolysis gas, how much is the price of the blower?

Three leaf Roots blower for transporting pyrolysis gasthe models are complete and can meet the needs of different users for different purposes.。

1、Brief introduction of Three leaf Roots blower for transporting pyrolysis gas

Three leaf Roots blower for transporting pyrolysis gasis a positive displacement blower with forced gas transmission characteristics.，support customization。

Three leaf Roots blower for transporting pyrolysis gas

2、Structural characteristics of Three leaf Roots blower for transporting pyrolysis gas

The Three leaf Roots blower for transporting pyrolysis gas has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for transporting pyrolysis gas enters and exits.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. impeller

It is the rotating part of the Three leaf Roots blower for transporting pyrolysis gas, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for transporting pyrolysis gas has gradually replaced the two-leaf Three leaf Roots blower for transporting pyrolysis gas.

Three leaf Roots blower for transporting pyrolysis gas

3、Introduction of advantages of Three leaf Roots blower for transporting pyrolysis gas

The advantages of Three leaf Roots blower for transporting pyrolysis gas are as follows:

1. Long service life

The mechanical friction of the Three leaf Roots blower for transporting pyrolysis gas is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

3. Convenient maintenance

The structure of the Three leaf Roots blower for transporting pyrolysis gas is relatively simple and easy to maintain.

4. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

5. energy-efficient

The Three leaf Roots blower for transporting pyrolysis gas has high efficiency and can realize gas transportation and pressurization with low energy consumption.

Three leaf Roots blower for transporting pyrolysis gas

4、Three leaf Roots blower for transporting pyrolysis gas application

Three leaf Roots blower for transporting pyrolysis gasIt is mostly used in dry, supply air, Pressurized transportation, aquaculture, pick up the suction, Ventilation and so on，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the main features are economical and durable, stable and reliable, wide application range, convenient manufacture and run smoothly。

Three leaf Roots blower for transporting pyrolysis gas

5、Introduction of Three leaf Roots blower for transporting pyrolysis gas characteristics

Three leaf Roots blower for transporting pyrolysis gasfeatures include low noise, wide application range, be of simple construction, economical and durable and strong adaptability，the product looks beautiful.，low in price，reliable quality。

Three leaf Roots blower for transporting pyrolysis gas

Three leaf Roots blower for transporting pyrolysis gasit has been widely used in chemical fertilizer, aquaculture, manufacturing industry, Pharmaceutical and chemical industries, Food and beverage processing and other industries，the main structure includes fuel tank, impeller, wallboard, rotator, bearing and so on，This productSimple structure and reliable operation.。