What is a Breeding aeration Roots blower? How much is the price of the Three leaf Roots blower?

Breeding aeration Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，widely used inpottery and porcelain,make paper,sewage disposal,pneumatic transport,smelt and other industries，favorable price，modern technology。

1、Brief introduction of Breeding aeration Roots blower

Breeding aeration Roots bloweris a positive displacement blower.，is a popular Breeding aeration Roots blower，at the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，multifunctional, with functions such as exhaust emission, ventilation, material fluidization, sewage disposal and material handling，The overall structural design is relatively simple，it is mainly composed of muffler, impeller, case, rotator and rotator。

Breeding aeration Roots blower

2、Breeding aeration Roots blower structure

The Breeding aeration Roots blower has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. impeller

It is the rotating part of the Breeding aeration Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Breeding aeration Roots blower has gradually replaced the two-leaf Breeding aeration Roots blower.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Breeding aeration Roots blower enters and exits.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Breeding aeration Roots blower

3、Breeding aeration Roots blower structure composition

The Breeding aeration Roots blower structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Breeding aeration Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. impeller

It is the rotating part of the Breeding aeration Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Breeding aeration Roots blower has gradually replaced the two-leaf Breeding aeration Roots blower.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Breeding aeration Roots blower

4、Breeding aeration Roots blower function

Breeding aeration Roots blowerit has the functions of pick up the suction, dehydrate, aeration, dry and pressurized transportation，Mainly used foraeration,mix,exhaust emission,supply air andpick up the suction，It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is developed and improved by hyde。

Breeding aeration Roots blower

5、Breeding aeration Roots blower advantage

The advantages of Breeding aeration Roots blower are as follows:

1. Durable performance

The impeller and shaft of the Breeding aeration Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. be of simple construction

The Breeding aeration Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

5. Long service life

The mechanical friction of the Breeding aeration Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Breeding aeration Roots blower

6、How much is the Breeding aeration Roots blower?

The Breeding aeration Roots blower price is introduced as follows:

1. Brand strength

At present, there are various brands of Breeding aeration Roots blower in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Breeding aeration Roots blower are different.

2. Manufacturer scale

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. hyde powder's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

3. Configuration level

Products of the same style, different configurations, the product price is definitely different, therefore, the Breeding aeration Roots blower price is affected by the configuration, and the price varies.

4. mass discrepancy

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

5. manufacturing cost

Cost is a direct and fundamental factor that affects the price of Breeding aeration Roots blower. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Breeding aeration Roots blower price, low in cost and low in price.

Breeding aeration Roots blower

Breeding aeration Roots blowerit has been widely used in water treatment, aquaculture, Dust removal, chemical fertilizer, petrochemical industry and other industries，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Breeding aeration Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Breeding aeration Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Breeding aeration Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Breeding aeration Roots blower less vibration and noise.。