What is a Roots blower for fish and shrimp farming? blower specifications, models, and parameters

Roots blower for fish and shrimp farmingis an efficient volumetric gas conveying and pressurizing equipment.。

1、Brief introduction of Roots blower for fish and shrimp farming

Roots blower for fish and shrimp farminga rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the product looks beautiful.，it has the functions of material handling, supply air, aeration, dry and mix。

Roots blower for fish and shrimp farming

2、Structural advantages of Roots blower for fish and shrimp farming

The Roots blower for fish and shrimp farming has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for fish and shrimp farming, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower for fish and shrimp farming enters and exits.

3. impeller

It is the rotating part of the Roots blower for fish and shrimp farming, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for fish and shrimp farming has gradually replaced the two-leaf Roots blower for fish and shrimp farming.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Roots blower for fish and shrimp farming

3、Roots blower for fish and shrimp farming picture

Roots blower for fish and shrimp farming picture at a glance, showing elegance.。

Roots blower for fish and shrimp farming

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Roots blower for fish and shrimp farming introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Roots blower for fish and shrimp farmingt operation, and helps customers to deeply understand the Roots blower for fish and shrimp farming production process and production site, and gain favorable comments and recognition from customers.。

Roots blower for fish and shrimp farming

As you can see from the live video.，hyde it has the functions of ventilation, cool, pressurized transportation, exhaust emission and desulfurization oxidation。

5、Introduction of Roots blower for fish and shrimp farming characteristics

Roots blower for fish and shrimp farmingit has the characteristics of strong adaptability, durable performance, wide application range, energy-efficient and be of simple construction，support customization。

Roots blower for fish and shrimp farming

6、Real-time shooting in hyde's production workshop

The finished products of the Roots blower for fish and shrimp farming factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Roots blower for fish and shrimp farming factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Roots blower for fish and shrimp farmingThe gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，The overall structural design is relatively simple，the main structure includes impeller, fuel tank, case, bearing, wallboard and so on，is a kind of high quality and low price Roots blower for fish and shrimp farming。