Introduction to Petrochemical Three Leaf Roots Blower, blower advantages, characteristics and principles

Petrochemical Three Leaf Roots Bloweris a positive displacement blower.，is developed and improved by hyde。

1、Brief introduction of Petrochemical Three Leaf Roots Blower

Petrochemical Three Leaf Roots Bloweris a positive displacement blower with forced gas transmission characteristics.，usually used in pottery and porcelain, building materials, power, Pharmaceutical and chemical industries, aquaculture and other fields。

Petrochemical Three Leaf Roots Blower

2、Introduction of Petrochemical Three Leaf Roots Blower characteristics

Petrochemical Three Leaf Roots Blowerit has the characteristics of wide application range, economical and durable, stable and reliable, be of simple construction and Precise control，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Petrochemical Three Leaf Roots Blower has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Petrochemical Three Leaf Roots Blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Petrochemical Three Leaf Roots Blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，be of high quality，The price is low and affordable。

Petrochemical Three Leaf Roots Blower

3、Functional advantages of Petrochemical Three Leaf Roots Blower

Petrochemical Three Leaf Roots Blowers have the following advantages.

1. Long service life

The mechanical friction of the Petrochemical Three Leaf Roots Blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. energy-efficient

The Petrochemical Three Leaf Roots Blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Low noise and vibration

The three-leaf rotor structure of the Petrochemical Three Leaf Roots Blower makes it less vibration and noise. This feature makes the Petrochemical Three Leaf Roots Blower work normally in situations where a quiet environment is needed.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Convenient maintenance

The structure of the Petrochemical Three Leaf Roots Blower is relatively simple and easy to maintain.

Petrochemical Three Leaf Roots Blower

4、Petrochemical Three Leaf Roots Blower function

Petrochemical Three Leaf Roots Blowermultifunctional, with functions such as supply air, aquaculture, pressurized transportation, ventilation and desulfurization oxidation，durable performance,convenient maintenance,smooth operation,run smoothly,strong adaptability，the principle is simple.It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，has been favored by more and more customers.。

Petrochemical Three Leaf Roots Blower

5、Structural advantages of Petrochemical Three Leaf Roots Blower

The Petrochemical Three Leaf Roots Blower has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the Petrochemical Three Leaf Roots Blower enters and exits.

2. impeller

It is the rotating part of the Petrochemical Three Leaf Roots Blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Petrochemical Three Leaf Roots Blower has gradually replaced the two-leaf Petrochemical Three Leaf Roots Blower.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Petrochemical Three Leaf Roots Blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Petrochemical Three Leaf Roots Blower

6、Petrochemical Three Leaf Roots Blower structure

The Petrochemical Three Leaf Roots Blower structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Petrochemical Three Leaf Roots Blower enters and exits.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Petrochemical Three Leaf Roots Blower

Petrochemical Three Leaf Roots BlowerIt is a product series that integrates mix, material handling, pick up the suction, supply air and dry，is a popular Petrochemical Three Leaf Roots Blower，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。