What is a Roots blower in electroplating factory? Introduction to the Working Principle of Three leaf Roots blower

Roots blower in electroplating factoryis a positive displacement blower with forced gas transmission characteristics.，is a common Roots blower in electroplating factory。

1、Brief introduction of Roots blower in electroplating factory

Roots blower in electroplating factoryis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower in electroplating factory less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower in electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Roots blower in electroplating factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，Mainly used forPressurized transportation,pick up the suction,Ventilation,Desulfurization oxidation andexhaust emission，super quality and competitive price。

Roots blower in electroplating factory

2、Roots blower in electroplating factory performance advantage

Roots blower in electroplating factorys have the following advantages.

1. Long service life

The mechanical friction of the Roots blower in electroplating factory is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. be of simple construction

The Roots blower in electroplating factory is simple in design and easy to manufacture and maintain.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

5. energy-efficient

The Roots blower in electroplating factory has high efficiency and can realize gas transportation and pressurization with low energy consumption.

Roots blower in electroplating factory

3、Roots blower in electroplating factory application

Roots blower in electroplating factoryIt is mostly used in Material fluidization, sewage disposal, aquaculture, material handling, supply air, dehydrate and so on，the product looks beautiful.，Because of the design of three-blade rotor, the Roots blower in electroplating factory has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower in electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。

Roots blower in electroplating factory

4、Roots blower in electroplating factory structure composition

The Roots blower in electroplating factory has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower in electroplating factory enters and exits.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Roots blower in electroplating factory, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower in electroplating factory has gradually replaced the two-leaf Roots blower in electroplating factory.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Roots blower in electroplating factory

5、Roots blower in electroplating factory function

Roots blower in electroplating factorymultifunctional, with functions such as aquaculture, aeration, material handling, sewage disposal and dry，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower in electroplating factory less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower in electroplating factory perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower in electroplating factory less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，the models are complete and can meet the needs of different users for different purposes.，the main structure includes bearing, rotator, case, bearing and fuel tank，This productSimple structure and reliable operation.，is designed by hyde powder with advanced technology。

Roots blower in electroplating factory

6、Roots blower in electroplating factory advantage

The advantages of Roots blower in electroplating factory are as follows:

1. Wide application range

The Roots blower in electroplating factory is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

2. Wide application range

Roots blower in electroplating factorys are widely used in many fields, such as aquaculture, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

3. Convenient maintenance

The structure of the Roots blower in electroplating factory is relatively simple and easy to maintain.

4. Simple structure and convenient manufacture

The Roots blower in electroplating factory is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

5. Long service life

The mechanical friction of the Roots blower in electroplating factory is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Roots blower in electroplating factory

Roots blower in electroplating factoryis a positive displacement blower.，Mainly used formaterial handling,Desulfurization oxidation,Ventilation,dehydrate andexhaust emission。