Introduction to Lu's blower in electroplating factory, Three leaf Roots blower advantages, characteristics and principles

Lu's blower in electroplating factoryis a positive displacement blower.，it is an ideal choice for customers to buy Lu's blower in electroplating factory。

1、Brief introduction of Lu's blower in electroplating factory

Lu's blower in electroplating factorythe models are complete and can meet the needs of different users for different purposes.，it is mainly composed of wallboard, impeller, rotator, case and impeller，the main features are wide application range, strong adaptability, economical and durable, convenient manufacture and convenient maintenance，It has a wide range of uses, including Material fluidization, mix, aeration, sewage disposal and cool，widely used in Flue gas treatment, coal chemical industry, Food and beverage processing, port, petrochemical industry and other fields。

Lu's blower in electroplating factory

2、Structural characteristics of Lu's blower in electroplating factory

The Lu's blower in electroplating factory structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Lu's blower in electroplating factory, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Lu's blower in electroplating factory enters and exits.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Lu's blower in electroplating factory

3、Lu's blower in electroplating factory application

Lu's blower in electroplating factoryIt has the functions of material handling, sewage disposal, pick up the suction, Material fluidization and mix，at the start of the operation,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，be loved by our customers.。

Lu's blower in electroplating factory

4、Advantages of Lu's blower in electroplating factory principle

Lu's blower in electroplating factorythe principle is simple.The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Lu's blower in electroplating factory has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Lu's blower in electroplating factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Lu's blower in electroplating factory less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Lu's blower in electroplating factory perform well in many situations where stable airflow is needed.，reliable quality，low in price。

Lu's blower in electroplating factory

5、Lu's blower in electroplating factory work site real shot

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Lu's blower in electroplating factory

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Lu's blower in electroplating factory price

The Lu's blower in electroplating factory price is introduced as follows:

1. Sales model

hyde powder has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

2. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. manufacturing cost

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

4. Company size

Although there are many manufacturers of products in jinan, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. Self quality

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

Lu's blower in electroplating factory

Lu's blower in electroplating factoryDue to the adoption of synchronous gear transmission and small gap design, the Lu's blower in electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Lu's blower in electroplating factory perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Lu's blower in electroplating factory less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，Structure consists of muffler, bearing, wallboard, case, rotator and so on，Lu's blower in electroplating factoryThe overall structural design is simple, diverse and beautiful.。