Introduction to Three leaf Roots blower for dust conveying, how much is the price of the blower?

Three leaf Roots blower for dust conveyingis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it is widely used inpower,power,make paper,petrochemical industry,Pharmaceutical and chemical industries and other industries，widely used in make paper, petrify, pottery and porcelain, aquaculture, Pharmaceutical and chemical industries and other fields，is carefully developed by hyde powder combined with advanced technology。The following is to introduce the Three leaf Roots blower for dust conveying:

1、Brief introduction of Three leaf Roots blower for dust conveying

Three leaf Roots blower for dust conveyingthe models are complete and can meet the needs of different users for different purposes.，It has a wide range of uses, including cool, mix, pick up the suction, material handling and aquaculture，the main features are run smoothly, convenient manufacture, low noise, smooth operation and strong adaptability，it has the functions of exhaust emission, supply air, material handling, dehydrate and aeration，in the course of work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.。

Three leaf Roots blower for dust conveying

2、Three leaf Roots blower for dust conveying function

Three leaf Roots blower for dust conveyingit has the functions of dehydrate, dry, sewage disposal, exhaust emission and desulfurization oxidation，it is usually composed of wallboard, bearing, muffler, rotator and fuel tank，a rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

Three leaf Roots blower for dust conveying

3、Advantages of Three leaf Roots blower for dust conveying principle

Three leaf Roots blower for dust conveyingat the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the main features are low noise, wide application range, Precise control, strong adaptability and wide application range。

Three leaf Roots blower for dust conveying

4、Three leaf Roots blower for dust conveying characteristics

Three leaf Roots blower for dust conveyingsmooth operation,be of simple construction,convenient maintenance,energy-efficient,stable and reliable，is a popular Three leaf Roots blower for dust conveying，Widely used inmaterial handling,Ventilation,Desulfurization oxidation,sewage disposal,aeration and so on。

Three leaf Roots blower for dust conveying

5、Three leaf Roots blower for dust conveying structure

The Three leaf Roots blower for dust conveying structure is introduced as follows:

1. impeller

It is the rotating part of the Three leaf Roots blower for dust conveying, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for dust conveying has gradually replaced the two-leaf Three leaf Roots blower for dust conveying.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for dust conveying enters and exits.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots blower for dust conveying, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Three leaf Roots blower for dust conveying

Three leaf Roots blower for dust conveyingit has the structure of wallboard, bearing, impeller, rotator and muffler，It is mostly used in pick up the suction, exhaust emission, cool, dehydrate, aquaculture, mix and so on，is a common Three leaf Roots blower for dust conveying。