Introduction to Airflow Conveyor Roots Blower, introduction to blower advantages and characteristics

Airflow Conveyor Roots Blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。The following is to introduce the Airflow Conveyor Roots Blower:

1、Brief introduction of Airflow Conveyor Roots Blower

Airflow Conveyor Roots Bloweris a positive displacement blower with forced gas transmission characteristics.。

Airflow Conveyor Roots Blower

2、On-site real shot of Airflow Conveyor Roots Blower

Provide high-definition Airflow Conveyor Roots Blower real shot, a variety of specifications and models for customers to visit.。

Airflow Conveyor Roots Blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Airflow Conveyor Roots Blower structure composition

The Airflow Conveyor Roots Blower has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Airflow Conveyor Roots Blower enters and exits.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Airflow Conveyor Roots Blower

4、Airflow Conveyor Roots Blower function

Airflow Conveyor Roots Blowermultifunctional, with functions such as sewage disposal, exhaust emission, supply air, material handling and pick up the suction，it is an ideal choice for customers to buy Airflow Conveyor Roots Blower。

Airflow Conveyor Roots Blower

5、Structural advantages of Airflow Conveyor Roots Blower

The Airflow Conveyor Roots Blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Airflow Conveyor Roots Blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. impeller

It is the rotating part of the Airflow Conveyor Roots Blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Airflow Conveyor Roots Blower has gradually replaced the two-leaf Airflow Conveyor Roots Blower.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Airflow Conveyor Roots Blower

Airflow Conveyor Roots Blowerthe product looks atmospheric.，Structure consists of muffler, bearing, rotator, case, fuel tank and so on，Airflow Conveyor Roots BlowerThe overall structural design is relatively simple and compact.。