What is a Three leaf Roots blower for pneumatic ash conveying? Introduction to the advantages and characteristics of the Three leaf Roots blower

Three leaf Roots blower for pneumatic ash conveyinga rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

1、Brief introduction of Three leaf Roots blower for pneumatic ash conveying

Three leaf Roots blower for pneumatic ash conveyingis a positive displacement blower.，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for pneumatic ash conveying perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for pneumatic ash conveying runs stably and reliably, without contact and wear parts, and has a long service life.，the product looks atmospheric.，It has a wide range of uses, and is often used inmix,aeration,aquaculture,sewage disposal,Desulfurization oxidation and so on，is based on hyde is a Three leaf Roots blower for pneumatic ash conveying newly developed by hyde powder。

Three leaf Roots blower for pneumatic ash conveying

2、Introduction of Three leaf Roots blower for pneumatic ash conveying characteristics

Three leaf Roots blower for pneumatic ash conveyingfeatures include energy-efficient, wide application range, run smoothly, convenient maintenance and energy-efficient，is a positive displacement blower with forced gas transmission characteristics.，at work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，has been favored by more and more customers.。

Three leaf Roots blower for pneumatic ash conveying

3、Three leaf Roots blower for pneumatic ash conveying application

Three leaf Roots blower for pneumatic ash conveyingIt can be used for exhaust emission, dry, Ventilation, supply air, dehydrate, Pressurized transportation and so on，generally, it is composed of muffler, bearing, case, fuel tank, impeller and other major components，run smoothly,wide application range,durable performance,smooth operation,convenient manufacture，is a common Three leaf Roots blower for pneumatic ash conveying，Cheap and high quality。

Three leaf Roots blower for pneumatic ash conveying

4、Three leaf Roots blower for pneumatic ash conveying picture

the product looks beautiful., advanced technology, complete specifications and models。

Three leaf Roots blower for pneumatic ash conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Structural characteristics of Three leaf Roots blower for pneumatic ash conveying

The Three leaf Roots blower for pneumatic ash conveying has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. impeller

It is the rotating part of the Three leaf Roots blower for pneumatic ash conveying, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for pneumatic ash conveying has gradually replaced the two-leaf Three leaf Roots blower for pneumatic ash conveying.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for pneumatic ash conveying enters and exits.

Three leaf Roots blower for pneumatic ash conveying

Three leaf Roots blower for pneumatic ash conveyingthe main features are strong adaptability, wide application range, Precise control, economical and durable and low noise，usually used in building materials, petrochemical industry, power, power, pottery and porcelain and other fields。