Introduction to Central feeding Lushi fan, advantages, characteristics and principles of blower

Central feeding Lushi fanis a positive displacement blower with forced gas transmission characteristics.，It has the functions of Ventilation, cool, pick up the suction, Pressurized transportation and exhaust emission，it has the functions of material handling, exhaust emission, dehydrate, aquaculture and material fluidization，at the start of the operation,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it is an ideal choice for customers to buy Central feeding Lushi fan。

1、Brief introduction of Central feeding Lushi fan

Central feeding Lushi fanthe models are complete and can meet the needs of different users for different purposes.，is a Central feeding Lushi fan newly developed by hyde。

Central feeding Lushi fan

2、Working principle of Central feeding Lushi fan

Central feeding Lushi fanthe principle is simple.It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the product looks atmospheric.，structure mainly includes: wallboard, impeller, rotator, fuel tank, muffler and so on，the main features are smooth operation, be of simple construction, strong adaptability, smooth operation and energy-efficient，super quality and competitive price。

Central feeding Lushi fan

3、Video analysis of Central feeding Lushi fan

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Central feeding Lushi fan production process and production site, and gain favorable comments and recognition from customers.。

Central feeding Lushi fan

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it is widely used insewage disposal,power,mine,chemical fertilizer,Textile light textile and other industries。

4、Structural characteristics of Central feeding Lushi fan

The Central feeding Lushi fan has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Central feeding Lushi fan enters and exits.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Central feeding Lushi fan

5、Central feeding Lushi fan price concessions

The Central feeding Lushi fan price is introduced as follows:

1. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Central feeding Lushi fan, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder Central feeding Lushi fan is reasonable for products with the same configuration.

2. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. regional difference

If the location of the manufacturer is superior, its transportation will be more convenient. hyde address:jinan has convenient transportation, which provides a good convenience for the transportation of Central feeding Lushi fan.

4. Low cost of raw materials

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Central feeding Lushi fan will also fluctuate to some extent.

5. market quotation

Generally, when the supply of Central feeding Lushi fan exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

Central feeding Lushi fan

6、hyde workshop real shot

On-site aerial photography of Central feeding Lushi fan。

Central feeding Lushi fan

As you can see from the live video.hyde powder It is a product series that integrates Desulfurization oxidation, mix, Material fluidization, aquaculture and aeration。

Central feeding Lushi fanmultifunctional, with functions such as supply air, pressurized transportation, mix, aeration and sewage disposal，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。