Introduction to HDSR350V Roots Vacuum Pump, blower specifications, model parameters

HDSR350V Roots Vacuum Pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，strong adaptability,convenient maintenance,energy-efficient,convenient manufacture,stable and reliable，It has a wide range of uses, including aeration, aquaculture, supply air, Ventilation and pick up the suction，can be customized according to user's needs.。

1、Brief introduction of HDSR350V Roots Vacuum Pump

HDSR350V Roots Vacuum Pumpis a double impeller synchronous compression machine, belonging to a positive displacement blower.，usually used in aquaculture, Dust removal, pneumatic transport, water treatment, chemical fertilizer and other fields。

HDSR350V Roots Vacuum Pump

2、HDSR350V Roots Vacuum Pump structure

The HDSR350V Roots Vacuum Pump structure is introduced as follows:

1. impeller

It is the rotating part of the HDSR350V Roots Vacuum Pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf HDSR350V Roots Vacuum Pump has gradually replaced the two-leaf HDSR350V Roots Vacuum Pump.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

HDSR350V Roots Vacuum Pump

3、HDSR350V Roots Vacuum Pump use

HDSR350V Roots Vacuum PumpIt has a wide range of uses, and is often used inMaterial fluidization,dehydrate,Pressurized transportation,cool,Material fluidization and so on，the product looks beautiful.，it has the functions of pick up the suction, sewage disposal, material fluidization, supply air and desulfurization oxidation，be of high quality，low in price。

HDSR350V Roots Vacuum Pump

4、Advantages of HDSR350V Roots Vacuum Pump principle

HDSR350V Roots Vacuum Pumpin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.。

HDSR350V Roots Vacuum Pump

5、HDSR350V Roots Vacuum Pump advantage

The advantages of HDSR350V Roots Vacuum Pump are as follows:

1. Strong adaptability

HDSR350V Roots Vacuum Pumps are suitable for many purposes and have been widely used in various fields.

2. Low noise and vibration

The three-leaf rotor structure of the HDSR350V Roots Vacuum Pump makes it less vibration and noise. This feature makes the HDSR350V Roots Vacuum Pump work normally in situations where a quiet environment is needed.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. Convenient maintenance

The structure of the HDSR350V Roots Vacuum Pump is relatively simple and easy to maintain.

5. Durable performance

The impeller and shaft of the HDSR350V Roots Vacuum Pump are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

HDSR350V Roots Vacuum Pump

6、HDSR350V Roots Vacuum Pump structure

The HDSR350V Roots Vacuum Pump structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the HDSR350V Roots Vacuum Pump enters and exits.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the HDSR350V Roots Vacuum Pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

HDSR350V Roots Vacuum Pump

HDSR350V Roots Vacuum Pumpit has been widely used in aquaculture, port, Food and beverage processing, smelt, aquaculture and other industries，the product looks atmospheric.。