Introduction to 304 stainless steel Roots vacuum pump equipment, how much is the price of the Three leaf Roots blower?

304 stainless steel Roots vacuum pump equipmentthe models are complete and can meet the needs of different users for different purposes.，it is an ideal choice for customers to buy 304 stainless steel Roots vacuum pump equipment。

1、Brief introduction of 304 stainless steel Roots vacuum pump equipment

304 stainless steel Roots vacuum pump equipmentis a positive displacement blower with forced gas transmission characteristics.，it has the characteristics of Precise control, wide application range, wide application range, convenient maintenance and durable performance，the product looks beautiful.，is a popular 304 stainless steel Roots vacuum pump equipment，reliable quality。

304 stainless steel Roots vacuum pump equipment

2、304 stainless steel Roots vacuum pump equipment principle

304 stainless steel Roots vacuum pump equipmentthe principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，It has a wide range of uses, including aquaculture, Material fluidization, mix, Pressurized transportation and exhaust emission。

304 stainless steel Roots vacuum pump equipment

3、304 stainless steel Roots vacuum pump equipment performance advantage

304 stainless steel Roots vacuum pump equipments have the following advantages.

1. Long service life

The mechanical friction of the 304 stainless steel Roots vacuum pump equipment is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Convenient maintenance

The structure of the 304 stainless steel Roots vacuum pump equipment is relatively simple and easy to maintain.

3. Durable performance

The impeller and shaft of the 304 stainless steel Roots vacuum pump equipment are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Low noise and vibration

The three-leaf rotor structure of the 304 stainless steel Roots vacuum pump equipment makes it less vibration and noise. This feature makes the 304 stainless steel Roots vacuum pump equipment work normally in situations where a quiet environment is needed.

304 stainless steel Roots vacuum pump equipment

4、304 stainless steel Roots vacuum pump equipment characteristics

304 stainless steel Roots vacuum pump equipmentrun smoothly,convenient manufacture,strong adaptability,low noise,economical and durable，at work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it is widely used inpower,aquaculture,water treatment,power,make paper and other industries，it mainly includes wallboard, impeller, bearing, fuel tank and muffler，This 304 stainless steel Roots vacuum pump equipmentThe overall structural design is relatively simple and compact.，has been favored by more and more customers.。

304 stainless steel Roots vacuum pump equipment

5、304 stainless steel Roots vacuum pump equipment structure

The 304 stainless steel Roots vacuum pump equipment structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the 304 stainless steel Roots vacuum pump equipment, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. muffler

Used to reduce the noise caused by airflow pulsation when the 304 stainless steel Roots vacuum pump equipment enters and exits.

304 stainless steel Roots vacuum pump equipment

304 stainless steel Roots vacuum pump equipmentis a positive displacement blower.，the product looks atmospheric.。