What is a Carbon steel Roots vacuum pump? Introduction to the advantages and characteristics of the Roots Blower

Carbon steel Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，at the start of the operation,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，Small size and small floor space make it easy to arrange and install in places with limited space.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Carbon steel Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Carbon steel Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Carbon steel Roots vacuum pump less vibration and noise.，Widely used inpick up the suction,dry,cool,exhaust emission,aeration and so on，is designed by hyde powder with advanced technology。

1、Brief introduction of Carbon steel Roots vacuum pump

Carbon steel Roots vacuum pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，It is a product series that integrates Material fluidization, cool, Ventilation, pick up the suction and dry，the advantage is Because of the design of three-blade rotor, the Carbon steel Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，Structure consists of fuel tank, fuel tank, rotator, bearing, impeller and so on，This Carbon steel Roots vacuum pumpThe structure is novel, special, advanced, reasonable and scientific.，at work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。

Carbon steel Roots vacuum pump

2、Carbon steel Roots vacuum pump application

Carbon steel Roots vacuum pumpCommonly used insewage disposal,dehydrate,exhaust emission,mix,material handling and so on，it has the functions of mix, material fluidization, cool, desulfurization oxidation and supply air，widely used in Flue gas treatment, petrochemical industry, pottery and porcelain, Pharmaceutical and chemical industries, water treatment and other fields，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Carbon steel Roots vacuum pump less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Carbon steel Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Carbon steel Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the Carbon steel Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Small size and small floor space make it easy to arrange and install in places with limited space.，it is an ideal choice for customers to buy Carbon steel Roots vacuum pump。

Carbon steel Roots vacuum pump

3、Video analysis of Carbon steel Roots vacuum pump

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Carbon steel Roots vacuum pump

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Widely used in Pressurized transportation, aquaculture, Desulfurization oxidation, supply air and Pressurized transportation。

4、Structural advantages of Carbon steel Roots vacuum pump

The Carbon steel Roots vacuum pump has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Carbon steel Roots vacuum pump enters and exits.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. impeller

It is the rotating part of the Carbon steel Roots vacuum pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Carbon steel Roots vacuum pump has gradually replaced the two-leaf Carbon steel Roots vacuum pump.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Carbon steel Roots vacuum pump

5、On-site real shot of Carbon steel Roots vacuum pump

The Carbon steel Roots vacuum pump looks beautiful and atmospheric, and it is realistic for customers to visit.。

Carbon steel Roots vacuum pump

Note: All the pictures in this article were taken by hyde manufacturer.。

6、hyde powder introduced

Shandong Haide Fenti Engineering Co., Ltd., located in shandong(Province), is a large Carbon steel Roots vacuum pump manufacturer. The Carbon steel Roots vacuum pump produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde

Carbon steel Roots vacuum pumpthe product looks atmospheric.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，is a double impeller synchronous compression machine, belonging to a positive displacement blower.。