What is a Permanent magnet variable frequency Roots vacuum pump system? Introduction to the advantages and characteristics of the Roots Blower

Permanent magnet variable frequency Roots vacuum pump systemis a positive displacement blower with forced gas transmission characteristics.，it has the functions of aeration, cool, exhaust emission, mix and ventilation，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，was developed and designed by hyde powder。

1、Brief introduction of Permanent magnet variable frequency Roots vacuum pump system

Permanent magnet variable frequency Roots vacuum pump systemis an efficient volumetric gas conveying and pressurizing equipment.，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Permanent magnet variable frequency Roots vacuum pump system perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Permanent magnet variable frequency Roots vacuum pump system runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the Permanent magnet variable frequency Roots vacuum pump system will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Because of the design of three-blade rotor, the Permanent magnet variable frequency Roots vacuum pump system has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，the product looks beautiful.，the main features are economical and durable, convenient maintenance, strong adaptability, stable and reliable and low noise，is a Permanent magnet variable frequency Roots vacuum pump system。

Permanent magnet variable frequency Roots vacuum pump system

2、Permanent magnet variable frequency Roots vacuum pump system structure composition

The Permanent magnet variable frequency Roots vacuum pump system has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Permanent magnet variable frequency Roots vacuum pump system, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Permanent magnet variable frequency Roots vacuum pump system has gradually replaced the two-leaf Permanent magnet variable frequency Roots vacuum pump system.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Permanent magnet variable frequency Roots vacuum pump system enters and exits.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Permanent magnet variable frequency Roots vacuum pump system, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Permanent magnet variable frequency Roots vacuum pump system

3、Permanent magnet variable frequency Roots vacuum pump system display

hyde Permanent magnet variable frequency Roots vacuum pump system complete specifications and models, new and old customers can choose at will, and high-definition pictures are available for customers' reference.。

Permanent magnet variable frequency Roots vacuum pump system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Permanent magnet variable frequency Roots vacuum pump system field real shot

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Permanent magnet variable frequency Roots vacuum pump systemt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Permanent magnet variable frequency Roots vacuum pump system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a popular Permanent magnet variable frequency Roots vacuum pump system。

5、Advantages of Permanent magnet variable frequency Roots vacuum pump system principle

Permanent magnet variable frequency Roots vacuum pump systemat work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.。

Permanent magnet variable frequency Roots vacuum pump system

6、Structural advantages of Permanent magnet variable frequency Roots vacuum pump system

The Permanent magnet variable frequency Roots vacuum pump system structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Permanent magnet variable frequency Roots vacuum pump system, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Permanent magnet variable frequency Roots vacuum pump system has gradually replaced the two-leaf Permanent magnet variable frequency Roots vacuum pump system.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Permanent magnet variable frequency Roots vacuum pump system, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Permanent magnet variable frequency Roots vacuum pump system

Permanent magnet variable frequency Roots vacuum pump systemthe main structure includes case, wallboard, bearing, impeller and rotator，This Permanent magnet variable frequency Roots vacuum pump systemThe structure is novel, special, advanced, reasonable and scientific.，Commonly used inaeration,aquaculture,material handling,Desulfurization oxidation,exhaust emission and so on。